Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 2.5 inch SAS hard drive with hot-swap tray

DELL

DELL 400-ALIG 1.2TB 2.5" SAS 10000 RPM 12Gb/s internal hard drive

SKU CH-XWWS-A88HJ

A 1.2 TB 2.5-inch SAS hard drive spinning at 10 000 RPM with a 12 Gb/s transfer rate and hot-swap tray

  • PackagingBare Drive
  • InterfaceSAS 3Gb/s
  • Capacity1.2TB
  • RPM10000 RPM
  • Average Latency3Gb/s
  • Form Factor2.5"
  • High-capacity 1.2TB storage for demanding workloads
  • Fast 10000 RPM spindle speed reduces data access latency
  • Reliable SAS 12Gb/s interface supports high-throughput server environments
  • Compact 2.5 inch form factor fits dense drive bays
  • Hot-swap tray design enables drive replacement without system downtime

Dell 400-ALIG 1.2TB SAS Drive

This Dell 400-ALIG is a 1.2TB internal hard drive built for servers and storage arrays that need fast mechanical storage. It uses a 2.5 inch form factor and spins at 10000 RPM for quick data access. The bare drive ships without a tray and is sold in new condition.

SAS 12Gb/s Interface Compatibility

The single specification that decides fit is the SAS interface running at 12Gb/s transfer rate. Your controller or backplane must support this exact interface speed to recognise the drive and achieve full throughput. A 3Gb/s or 6Gb/s only host will limit performance or prevent detection.

Sustained Load Behaviour

Under continuous workloads the 10000 RPM spindle maintains consistent throughput for sequential reads and writes. The mechanical design handles sustained I/O without the thermal throttling seen in solid-state alternatives. Hot-swap support allows replacement without powering down the enclosure.

Priekšrocības

  • High-capacity 1.2TB storage for demanding workloads
  • Fast 10000 RPM spindle speed reduces data access latency
  • Reliable SAS 12Gb/s interface supports high-throughput server environments
  • Compact 2.5 inch form factor fits dense drive bays
  • Hot-swap tray design enables drive replacement without system downtime

Specifikācijas

BrandDell
Model400-ALIG
PackagingBare Drive
InterfaceSAS 3Gb/s
Capacity1.2TB
RPM10000 RPM
Average Latency3Gb/s
Form Factor2.5"

Jautājumi par šo preci

What does the 10000 RPM spindle speed mean for latency inside a server?

A 10000 RPM spindle yields roughly 3 ms average rotational latency, so read requests spend less time waiting for the platter to arrive under the head.

What does the 12Gb/s SAS interface actually cap in practice?

The drive uses a SAS 12Gb/s link, so the bus ceiling is 12 Gb/s; sustained throughput will be lower and depends on the controller and backplane.

What physical space and mounting does the 2.5" hot-swap tray need?

The drive fits a standard 2.5-inch hot-swap bay and uses the tray's connector for power and data; no separate cables are required.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.