Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

DELL

DELL 400-AMPP 8TB 3.5" SAS 7.2K 12Gb/s internal hard drive

SKU CH-XY8A-52SJG

8TB 3.5-inch SAS hard drive spins at 7200 RPM with a 12Gb/s transfer rate and hot-swap tray

  • PackagingBare Drive
  • InterfaceSAS 3Gb/s
  • Capacity8TB
  • RPM7200 RPM
  • Average Latency3Gb/s
  • Form Factor3.5"
  • 8 TB capacity stores large data sets
  • 12 Gb/s SAS interface moves data quickly
  • 7200 RPM spindle speed reduces access latency
  • 5 inch form factor fits standard drive bays
  • Hot-swap tray enables drive changes without downtime

Dell 400-AMPP 8TB Nearline SAS Drive

The Dell 400-AMPP is an 8TB 3.5-inch Nearline SAS hard drive spinning at 7200 RPM. It is built for servers and storage arrays that need high-capacity bulk storage with hot-swap capability. The bare-drive packaging suits system integrators and IT departments replacing or expanding existing drive bays.

12Gb/s SAS Interface Practical Limits

The drive connects through a 12Gb/s SAS interface while the specifications also list a 3Gb/s average latency figure. Actual throughput will depend on the host controller and backplane negotiated link speed. Cable length, expander topology and concurrent drive count can reduce sustained transfer rates below the interface maximum.

Compatibility Checks Before Ordering

Verify that your chassis accepts 3.5-inch hot-swap trays and that the backplane supports SAS signalling at the required link rate. Confirm the RAID or HBA controller recognises Nearline SAS drives and presents the correct block size. Ensure firmware revisions on both controller and drive are aligned for reliable operation.

Priekšrocības

  • 8 TB capacity stores large data sets
  • 12 Gb/s SAS interface moves data quickly
  • 7200 RPM spindle speed reduces access latency
  • 5 inch form factor fits standard drive bays
  • Hot-swap tray enables drive changes without downtime

Specifikācijas

BrandDell
Model400-AMPP
PackagingBare Drive
InterfaceSAS 3Gb/s
Capacity8TB
RPM7200 RPM
Average Latency3Gb/s
Form Factor3.5"

Jautājumi par šo preci

Should I choose the 8TB model or a smaller capacity for my storage array?

The drive is offered in an 8TB capacity; select it when you need that amount of raw space in a single 3.5" bay.

What does the 7.2K RPM rating mean for everyday read and write speeds?

At 7200 RPM the drive delivers nearline performance suited to bulk storage and sequential workloads rather than low-latency transactional work.

The SAS interface is listed at 12Gb/s — what throughput can I expect in practice?

The 12Gb/s SAS link sets the bus ceiling; actual sustained transfer will be limited by the 7200 RPM mechanical speed and the 3Gb/s average latency figure.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.