SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
DELL
A 1 TB SATA 6.0Gb/s hard drive spinning at 7200 RPM in a 2.5 inch form factor for desktop storage expansion
This 2.5-inch drive adds 1 TB of storage to compatible Dell systems through a SATA 6.0Gb/s connection. It spins at 7200 RPM and uses SLC NAND flash memory for caching. The drive is sold new and may arrive in retail or OEM packaging.
The 7200 RPM spindle speed supports consistent sequential throughput during extended read and write sessions. SLC cache helps absorb write bursts without the sharp slowdowns seen on drives that rely on TLC or QLC memory. Mechanical latency remains the limiting factor for random workloads under continuous pressure.
Mount the drive in any 2.5-inch bay and connect the standard SATA data and power cables; no extra drivers are required for the SATA interface. The most common problems are using a 3.5-inch bracket without an adapter, connecting to a SATA 3.0Gb/s port which halves the link speed, and forgetting to initialise the disk in the operating system before use.
| Brand | DELL ENTERPRISE ACCESSORIES |
|---|---|
| Model | 400-ATJG |
| Interface | SATA 6.0Gb/s |
| Capacity | 1TB |
| NAND Flash Memory Type | SLC |
| RPM | 7200 RPM |
| Form Factor | 2.5" |
| Sūtījuma svars | 0.68 kg |
| Sūtījuma izmēri | 279 × 178 × 76 mm |
The 7200 RPM spindle and SATA 6.0Gb/s interface generate typical mechanical-drive warmth and audible seek noise; ensure your chassis has adequate airflow for 2.5" bays.
A free 2.5" drive bay, a SATA data cable and a SATA power connector from the power supply are required for installation.
Yes — the SATA 6.0Gb/s interface auto-negotiates down to 3 Gbps, so the 1 TB drive will operate normally on legacy ports.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?