Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular silver metal server power supply unit with integrated handle and ventilation grille

DELL

DELL A870P-S0 870 W power supply

SKU CH-93TP-S2MRM MPN A870P-S0

Hot-swap 870 W power supply for Dell PowerEdge R710 and T610 servers, accepting 100-240 V input at 12 A

  • TypePower Supply
  • Maximum Power870 W
  • Delivers 870 W to power demanding server workloads
  • Hot-swap design lets you replace the unit without shutting down
  • Wide 100-240 V input works on global power grids
  • Runs on 50-60 Hz mains frequency for worldwide use
  • Compatible with PowerEdge R710 and T610 servers

Dell 870 W hot-swap power supply

This unit is a Dell A870P-S0 rated at 870 W and designed for hot-swap replacement in Dell PowerEdge R710 and T610 servers. It accepts a universal 100-240 V input at up to 12 A and operates on 50-60 Hz mains. The supply is intended for IT teams maintaining these specific rack and tower platforms.

Thermals noise and power draw

The 870 W maximum output defines the thermal load the server cooling must handle under full utilisation. Fan speed and acoustic output are managed by the host chassis rather than the supply itself. Input current reaches 12 A at the low end of the voltage range.

Compatibility constraint

This power supply fits only Dell PowerEdge R710 and T610 systems that use the A870P-S0 form factor and part numbers such as 7NVX8, PT164 or VT6G4. It will not work in other Dell servers, workstations or third-party chassis. Builders needing a standard ATX or redundant supply for a different platform must choose another model.

Priekšrocības

  • Delivers 870 W to power demanding server workloads
  • Hot-swap design lets you replace the unit without shutting down
  • Wide 100-240 V input works on global power grids
  • Runs on 50-60 Hz mains frequency for worldwide use
  • Compatible with PowerEdge R710 and T610 servers

Specifikācijas

BrandDell
ModelA870P-S0
TypePower Supply
Maximum Power870 W

Jautājumi par šo preci

How do I install the A870P-S0 hot-swap power supply into a PowerEdge R710 or T610, and what step is commonly missed?

Slide the unit into the bay until the latch clicks, then verify the amber and green LEDs both illuminate; the missed step is forgetting to engage the release lever fully so the supply seats on the backplane connector.

What maintenance or replacement will the A870P-S0 need during its service life?

The internal fan is the only moving part; plan to replace the supply when fan noise rises or the amber fault LED stays lit, as Dell does not sell a separate fan module for this 870 W unit.

What limit appears first when the A870P-S0 runs continuously at full load?

The 870 W maximum output is the hard ceiling; sustained draw at that level will trip the over-current protection before any thermal limit is reached, shutting the supply down until the load drops.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.