DELL
DELL HVJNH 1.8TB 10K SAS 6Gbps 2.5" internal hard drive
A 1.8 TB, 10 000 RPM SAS 6 Gb/s drive in a 2.5 inch form factor for high-speed server storage
- InterfaceSAS 6Gb/s
- Capacity1.8TB
- RPM10000 RPM
- Form Factor2.5"
- 8 TB capacity stores large datasets
- 10 000 RPM spindle speeds up data access
- SAS 6 Gb/s interface enables fast host transfers
- 5 inch form factor fits dense server bays
- New condition delivers full manufacturer reliability
1.8 TB 10K SAS drive
The Dell HVJNH is a 1.8 TB internal hard drive spinning at 10 000 RPM with a SAS 6 Gb/s interface in a 2.5 inch form factor. It is supplied new and designed for desktop or server storage arrays that accept 2.5 inch SAS drives.
Who this suits and who it does not
This drive suits builders expanding a SAS backplane or replacing a failed 10K spindle in an existing array. It does not suit systems that only provide SATA ports, lack a 2.5 inch bay, or require a larger capacity than 1.8 TB.
Deciding specification
The SAS 6 Gb/s interface is the single specification that decides compatibility; the host controller and backplane must support SAS signalling at 6 Gb/s for the drive to function.
Priekšrocības
- 8 TB capacity stores large datasets
- 10 000 RPM spindle speeds up data access
- SAS 6 Gb/s interface enables fast host transfers
- 5 inch form factor fits dense server bays
- New condition delivers full manufacturer reliability
Specifikācijas
| Interface | SAS 6Gb/s |
|---|---|
| Capacity | 1.8TB |
| RPM | 10000 RPM |
| Form Factor | 2.5" |
Jautājumi par šo preci
Does the HVJNH 1.8 TB 2.5-inch SAS drive ship with any mounting hardware or cables, or must they be purchased separately?
The drive is supplied in OEM packaging that may vary; no brackets, screws or SAS cables are included, so any required mounting kit or cable must be sourced separately.
Should I choose the 1.8 TB 10 000 RPM model or a lower-capacity SAS drive for a write-intensive database server?
The 1.8 TB 10 000 RPM model provides the highest capacity at this speed tier on a 6 Gb/s SAS interface, making it the logical choice when both space and sustained write performance are needed.
What sustained transfer rate can I expect from the 1.8 TB 10 000 RPM SAS drive once installed in a server backplane?
The 6 Gb/s SAS interface sets the link ceiling, while the 10 000 RPM platters determine actual sustained throughput, which will be consistent with other 10K SAS drives of this capacity.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
