Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Dell 146GB 15000 RPM SAS 3.5 inch 1.0 inch hard drive with tray

DELL

DELL M8034 146GB 15000 RPM SAS 3.5" 1.0" internal hard drive

SKU CH-HJ39-YXB6A

15,000 RPM SAS drive with 16 MB buffer and 1.0" height for Dell PowerEdge servers

  • InterfaceSerial Attached SCSI (SAS)
  • Capacity146GB
  • RPM15000 RPM
  • UsageIdeal for Servers
  • Form Factor2.5"
  • 146 GB capacity stores critical server data
  • 15,000 RPM spindle speed accelerates transaction processing
  • SAS 3 Gb/s interface connects directly to PowerEdge controllers
  • 0-inch low-profile form factor fits dense 3.5-inch drive bays
  • 16 MB buffer smooths burst I/O workloads

Dell M8034 146GB SAS Server Drive

The Dell M8034 is a 146GB internal hard drive spinning at 15000 RPM with a Serial Attached SCSI interface. It uses a 2.5-inch mechanism mounted in a 3.5-inch tray that is 1.0 inch high. The drive is listed as new and intended for server environments.

Suited for Dell PowerEdge and PowerVault systems

This drive fits Dell PowerEdge servers including the 1900, 1950, 2900, 2950, 2970, 6850, 6950, 840, 860, R200, R300, R900, R905, SC1430, SC1435, SC440, T100, T105 and T300 models. It also supports PowerVault MD1000 and MD3000 arrays. Builders needing a different interface or higher capacity should consider other options.

15000 RPM spindle speed decides fit

The 15000 RPM spindle speed delivers the high random I/O performance required by transactional server workloads. A 16 MB buffer supports burst transfers across the 3Gb/s SAS link. If the target system cannot accommodate a 1.0 inch high 3.5-inch form factor, this drive will not install.

Priekšrocības

  • 146 GB capacity stores critical server data
  • 15,000 RPM spindle speed accelerates transaction processing
  • SAS 3 Gb/s interface connects directly to PowerEdge controllers
  • 0-inch low-profile form factor fits dense 3.5-inch drive bays
  • 16 MB buffer smooths burst I/O workloads

Specifikācijas

BrandDell
ModelM8034
InterfaceSerial Attached SCSI (SAS)
Capacity146GB
RPM15000 RPM
UsageIdeal for Servers
Form Factor2.5"

Jautājumi par šo preci

Does the drive ship with a tray or caddy, and is a SAS cable included?

The unit comes with a tray for 3.5" bays; a SAS cable is not included and must be sourced separately.

The listing shows both 2.5" and 3.5" form factors — which one is correct?

The physical drive is a 2.5" mechanism mounted in a 3.5" carrier that is 1.0" high, so it fits standard 3.5" server slots.

What sustained throughput can I expect from the 15000 RPM SAS interface in a Dell PowerEdge server?

The 3Gb/s SAS link and 16 MB buffer deliver high sequential speeds suited to transactional workloads on compatible PowerEdge and PowerVault arrays.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.