Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small silver metal 2.5 inch SAS hard drive with green circuit board and F830C label

DELL

DELL PGHJG 300 GB 10K 2.5 SAS F830C internal hard drive

SKU CH-STAT-5C7S7

A 300 GB 2.5-inch SAS internal hard drive spinning at 10K rpm for fast enterprise storage

  • 300 GB capacity stores large datasets
  • 10 000 RPM spindle delivers fast data access
  • 5 inch form factor fits compact servers
  • SAS interface supports 6 Gb/s throughput
  • F830C tray simplifies hot-swap installation

Capacity and fit

This 300 GB SAS drive uses a 2.5 inch form factor and spins at 10K RPM. It is built for servers or workstations that require a small high-speed disk with a SAS interface.

Installation notes

The drive slides into a standard 2.5 inch SAS bay and connects with the SAS data and power cables already present in compatible chassis. No special tools are required beyond a screwdriver for the mounting screws. Problems usually arise when the backplane or controller does not support the SAS 6 Gb/s link speed, so verify controller compatibility before fitting the drive.

Interface limits

The SAS 6 Gb/s interface caps sustained throughput at the link rate and the 10K spindle limits random IOPS compared with solid-state media. The 300 GB capacity restricts the amount of hot data that can stay on the fastest tier, so larger datasets will need additional drives or a different storage tier.

Priekšrocības

  • 300 GB capacity stores large datasets
  • 10 000 RPM spindle delivers fast data access
  • 5 inch form factor fits compact servers
  • SAS interface supports 6 Gb/s throughput
  • F830C tray simplifies hot-swap installation

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How do I verify the 10K RPM SAS drive is performing correctly after installation?

Check the BIOS or RAID controller for the 300 GB capacity and 6 Gbps link speed, then run a SMART health scan to confirm zero reallocated sectors.

What comes with the PGHJG drive and what must I source separately?

The drive ships in retail or OEM packaging; you will need a 2.5-inch drive bay or adapter and a SAS cable or backplane that supports 6 Gbps.

Which capacity and speed variant should I choose for a Dell F830C server?

Select the 300 GB 10K RPM SAS model with the F830C tray to match the server's drive sled and 6 Gbps controller.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.