Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

DELL

DELL PM883a MZ7LH3T8HALTAD3 3.84TB 2.5in SATA enterprise SSD

SKU CH-08G5-3GVB6

3.84 TB 2.5-inch SATA enterprise SSD rated at 1 DWPD with 550 MB/s read, 520 MB/s write and power-loss protection

  • Sustained Sequential Read550 MB/s
  • Sustained Sequential Write520 MB/s
  • Endurance1 DWPD
  • MTBF2,000,000 hours
  • Form Factor2.5"
  • Capacity3.84TB
  • Consistent 550 MB/s reads accelerate database queries
  • Stable 520 MB/s writes sustain logging workloads
  • 1 DWPD endurance rating supports daily full-capacity rewrites
  • 2,000,000-hour MTBF underpins long-term array reliability
  • Power-loss protection preserves in-flight data during unexpected outages

Enterprise capacity for mixed workloads

The DELL PM883a MZ7LH3T8HALTAD3 provides 3.84TB of storage in a 2.5in SATA form factor. It targets enterprise servers, storage arrays and workstation computers that need high-capacity solid-state storage for read-intensive applications. The drive uses 3D TLC flash rated at 1 DWPD endurance for consistent daily write cycles.

Steady throughput under sustained load

Sustained sequential read reaches 550 MB/s while sustained sequential write holds at 520 MB/s across the full capacity. The SATA 6Gb/s interface delivers predictable bandwidth for backup, archiving and big-data analytics workloads without the thermal throttling seen in burst-oriented consumer drives. An MTBF of 2000000 hours reflects the design target for continuous operation in data-centre environments.

Standard 2.5in SATA installation

The drive fits any 2.5in bay with a SATA data and power connection, requiring no special brackets or cables. Power-Loss Protection helps preserve in-flight data during unexpected shutdowns, while Native Command Queuing and TRIM Command Support maintain performance over time. Installers should verify that the host controller supports the full SATA 6Gb/s link speed to avoid negotiating down to a slower rate.

Priekšrocības

  • Consistent 550 MB/s reads accelerate database queries
  • Stable 520 MB/s writes sustain logging workloads
  • 1 DWPD endurance rating supports daily full-capacity rewrites
  • 2,000,000-hour MTBF underpins long-term array reliability
  • Power-loss protection preserves in-flight data during unexpected outages

Specifikācijas

Sustained Sequential Read550 MB/s
Sustained Sequential Write520 MB/s
Endurance1 DWPD
MTBF2,000,000 hours
BrandDell/Samsung
SeriesPM883a
ModelMZ-7LH3T8C
Part NumberMZ7LH3T8HALTAD3
Form Factor2.5"
Capacity3.84TB
InterfaceSATA III
FeaturesPower-Loss Protection, Native Command Queuing, TRIM Command Support

Jautājumi par šo preci

How much heat and noise does the 3.84TB PM883a produce when running continuously?

As a solid-state drive with no moving parts, the 3.84TB PM883a generates minimal heat and operates silently during sustained workloads.

What host interface and physical bay does the MZ7LH3T8HALTAD3 require?

The drive uses a standard SATA 6Gb/s interface and fits any 2.5-inch drive bay with a SATA data and power connection.

Will the PM883a work alongside older SATA mechanical drives in the same array?

Yes, the SATA III interface allows the PM883a to operate alongside legacy SATA HDDs on the same controller or backplane.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.