Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver rack-mount server chassis with sixteen 2.5-inch drive bays front panel

DELL

DELL PowerEdge T630 16SFF 1x Xeon E5-2699v4 384GB DDR4 rack server

SKU CH-Q28J-XXXXS

16-bay 2.5-inch rack server with one 22-core 2.2 GHz Xeon and 384 GB DDR4 ECC memory

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size384GB
  • Supports up to 16 hot-swap 2.5" drive bays for dense storage capacity
  • 22-core Xeon E5-2699 v4 at 2.2 GHz delivers high multi-threaded throughput
  • 384 GB DDR4 ECC registered memory ensures data integrity under heavy workloads
  • PERC H730 SAS controller enables hardware RAID for performance and redundancy
  • iDRAC8 Enterprise remote management simplifies out-of-band server administration

Dell PowerEdge T630 16SFF rack server

The Dell PowerEdge T630 is a 2U rack server with sixteen 2.5-inch drive bays and a single Xeon E5-2699 v4 processor running at 2.2 GHz. It ships with 384 GB of DDR4 ECC registered memory and a PERC H730 SAS controller. The chassis includes dual 1100 W power supplies and iDRAC8 Enterprise remote management.

Suits virtualisation hosts needing dense memory

Buyers who need a second processor installed should look elsewhere because only one CPU is fitted. The integrated graphics and single 1 GbE dual-port adapter limit GPU compute and high-speed networking workloads. No drives are included so storage must be sourced separately.

Verify rack depth for the 36-inch chassis

Confirm the PERC H730 supports your intended RAID level and that SATA or SAS drives match the backplane. Ensure DDR4 ECC registered modules are used for any memory expansion up to 1.5 TB. Check that iDRAC8 Enterprise licensing meets remote management requirements.

Priekšrocības

  • Supports up to 16 hot-swap 2.5" drive bays for dense storage capacity
  • 22-core Xeon E5-2699 v4 at 2.2 GHz delivers high multi-threaded throughput
  • 384 GB DDR4 ECC registered memory ensures data integrity under heavy workloads
  • PERC H730 SAS controller enables hardware RAID for performance and redundancy
  • iDRAC8 Enterprise remote management simplifies out-of-band server administration

Specifikācijas

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Hard Drive (Installed)3,84
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Jautājumi par šo preci

Which drives must I supply to populate the 16 front 2.5-inch bays?

The chassis accepts sixteen 2.5-inch SATA or SAS drives; no drives are included, so you provide the capacity and speed you need.

Will my existing PERC H730 RAID controller recognise the installed Xeon E5-2699 v4 and 384 GB DDR4 memory?

Yes, the PERC H730 SAS controller is already installed and works with the single 22-core 2.2 GHz processor and the 384 GB DDR4 ECC registered memory.

How can I confirm the server is operating correctly after installation?

Check the iDRAC8 Enterprise interface for green health status, verify the PERC H730 shows all attached drives in a healthy RAID array, and run the built-in diagnostics from the lifecycle controller.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.