Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver rectangular server power module with handle and ventilation grille

DELL

DELL VKDD2 PowerEdge 495W 80 Plus Platinum Hot Swap Power Supply

SKU CH-QH02-PDK56

Redundant 495 W server power module with 80 Plus Platinum efficiency, hot-swap support and 100-240 V input at 50/60 Hz

  • TypePower Supplies
  • Single/RedundantRedundant
  • Maximum Power495 W
  • Input Voltage100 - 240 V
  • Input Frequency Range50/60 Hz
  • 80 Plus Platinum efficiency lowers energy costs
  • 495 W maximum power supports demanding server workloads
  • Hot-swap design enables replacement without downtime
  • Redundant configuration protects against power failure
  • Wide 100–240 V input suits global deployments

Dell PowerEdge 495 W Redundant Module

This Dell PowerEdge power supply delivers up to 495 watts of redundant power for compatible server chassis. The hot-swap design allows replacement without shutting down the host, supporting continuous operation in mission-critical environments. It accepts a universal input range of 100 to 240 volts at 50 or 60 hertz.

80 Plus Platinum Efficiency Under Load

Rated at 80 Plus Platinum, the unit maintains high conversion efficiency across typical server load profiles rather than only at peak output. Redundant architecture shares current between modules, reducing thermal stress on each supply during sustained operation. The wide input voltage window accommodates fluctuating mains conditions found in data-centre deployments.

Hot-Swap Build for Rack Maintenance

A hot-swap connector and latch mechanism enable tool-less removal while the system remains powered, minimising downtime during maintenance windows. Redundant configuration means a single module failure does not interrupt service, allowing scheduled replacement. Dell manufacturing standards and rigorous testing ensure consistent reliability for enterprise infrastructure.

Priekšrocības

  • 80 Plus Platinum efficiency lowers energy costs
  • 495 W maximum power supports demanding server workloads
  • Hot-swap design enables replacement without downtime
  • Redundant configuration protects against power failure
  • Wide 100–240 V input suits global deployments

Specifikācijas

BrandDELL
Part NumberVKDD2
TypePower Supplies
Single/RedundantRedundant
Maximum Power495 W
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz

Jautājumi par šo preci

How much heat and noise should I expect from the 495 W 80 Plus Platinum unit when it runs continuously?

The 80 Plus Platinum rating means the supply operates at high efficiency across typical loads, so less energy is wasted as heat and the cooling fan can run at lower speeds during all-day operation.

Which Dell PowerEdge chassis and backplane must I already have for this hot-swap module to connect and lock in place?

This VKDD2 module is designed for Dell PowerEdge servers that accept a 495 W redundant hot-swap power supply; the chassis must provide the matching bay and power backplane for the unit to seat and latch correctly.

Will the 100-240 V, 50/60 Hz input let this supply share a rack PDU with older Dell servers that use different wattage modules?

Yes, the wide 100-240 V input range and 50/60 Hz tolerance match the AC specifications of many legacy Dell PowerEdge platforms, allowing mixed-wattage modules to draw power from the same PDU.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.