Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Slim silver 3D printing pen with OLED screen and ceramic nozzle, 170mm long, 14mm diameter, 41g

DEWANG

DEWANG 3D Printing Pen Silver 1.75mm OLED 170mm 41g

SKU CH-P9E3-HNDXZ

A slim 3D printing pen with OLED display, 1.75 mm filament support, six speed levels and a built-in cooling fan for PLA and ABS

  • Type3D Printing Pen
  • ColorSilver
  • Body MaterialStainless Steel
  • Filament Diameter1.75mm
  • Jets Diameter0.7mm
  • Max Working Speed6 Levels

Color Silver

  • Ultra-slim 1.4 cm diameter fits comfortably in hand
  • Built-in fan freezes filament mid-air for faster solidification
  • Individual motor rated for 103 hours of continuous operation
  • Switch between PLA and ABS modes instantly without restarting
  • Six adjustable speed levels let you match flow to any project

Ultra-Slim 3D Printing Pen for Makers

The DEWANG pen measures 170 mm long with a 14 mm diameter and weighs 41 g. Its stainless-steel body and ceramic nozzle suit hobbyists, students and educators who want a lightweight tool for freehand 3D drawing with 1.75 mm PLA or ABS filament.

OLED Temperature Control

An integrated OLED screen shows the active temperature between 130 and 230 degree. Users can toggle between PLA at 190 degree and ABS at 210 degree without restarting the pen, so material changes do not interrupt a build session.

Six Speed Levels and 103-Hour Motor Life

The internal motor is rated for 103 hours of continuous operation across six adjustable extrusion speeds. Built-in cooling fans solidify filament quickly for mid-air structures, though the 0.7 mm nozzle limits fine detail and the 5 V 2 A input restricts use to USB power banks or adapters.

Priekšrocības

  • Ultra-slim 1.4 cm diameter fits comfortably in hand
  • Built-in fan freezes filament mid-air for faster solidification
  • Individual motor rated for 103 hours of continuous operation
  • Switch between PLA and ABS modes instantly without restarting
  • Six adjustable speed levels let you match flow to any project

Specifikācijas

Type3D Printing Pen
ColorSilver
Body MaterialStainless Steel
Filament Diameter1.75mm
Jets Diameter0.7mm
Max Working Speed6 Levels
Operation TemperatureABS 210?, PLA 190?
Package Contents1 X 3D Printing Pen
1 X Power Adapter
1 X USB Cable
3 X 3 Meters PLA Filaments
1 X Screwdriver
1 X Manual
Dimensions170*14*14mm
Weight41g

Citas šī modeļa versijas

Vēl 3 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What does the 1.75mm filament diameter mean for the pen's output detail?

The 1.75mm filament feeds through a 0.7mm ceramic nozzle, so the extruded line is thinner than the raw filament, giving finer control for detailed drawing.

How does the USB power input limit where I can use the pen?

It runs on DC 5V 2A, so you can plug it into a power bank, a computer USB port, or the included US-plug adapter for portable or desk use.

Will the 170mm stainless-steel body fit in a standard pen holder or case?

At 170mm long and 14mm wide, the slim metal body fits most pen pots, and the detachable nozzle plus protective cap make it safe to store hot.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.