Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black rectangular ATX power supply unit with single fan visible

E-POWER

E-POWER EP-650-TD1 650 W power supply ATX12V active PFC non-modular

SKU CH-SD8J-Q48NA MPN EP-650-TD1

Delivers 650 W through dual +12 V rails with active PFC and a full set of SATA, Molex and PCIe connectors in a non-modular black chassis

  • TypeATX12V
  • Maximum Power650 W
  • Fans1
  • PFCActive
  • Main Connector20+4Pin
  • +12V Rails2
  • 650 W output supports demanding builds with dual 12 V rails at 20 A each
  • Active PFC corrects power factor for cleaner draw across 100-240 V input
  • Low ripple and noise keeps voltage stable for sensitive components
  • Four SATA connectors power multiple drives from a single unit
  • UL, CSA, CE, CB and FCC approvals confirm safety compliance

650 W ATX12V unit for standard builds

The E-POWER EP-650-TD1 delivers 650 W through an ATX12V design with active PFC. It suits builders assembling a typical desktop that needs a single graphics card. The non-modular layout keeps cabling simple for first-time assemblers. It is not for systems that demand fully modular cable management or multiple high-end GPUs.

Sustained load behaviour with dual +12 V rails

Four +12 V rails are each rated at 20 A, spreading the load across the CPU and graphics connectors. Active PFC maintains efficient draw from 100 to 240 V inputs at 50 or 60 Hz. Low ripple and noise output helps stability during long sessions. Over-voltage and short-circuit protection act on every rail if limits are exceeded.

Black case construction and fixed connector set

A single 120 mm fan cools the black enclosure while 100 % Hi-Pot testing verifies insulation before shipping. Fixed cables include a 20+4 pin main, one P4, six Molex, four SATA, one floppy and two PCI-E plugs. The 6-pin and 6+2-pin PCI-E connectors support one mid-range graphics card. Builders needing more SATA ports or a second PCI-E cable must look elsewhere.

Priekšrocības

  • 650 W output supports demanding builds with dual 12 V rails at 20 A each
  • Active PFC corrects power factor for cleaner draw across 100-240 V input
  • Low ripple and noise keeps voltage stable for sensitive components
  • Four SATA connectors power multiple drives from a single unit
  • UL, CSA, CE, CB and FCC approvals confirm safety compliance

Specifikācijas

BrandePOWER
ModelEP-650-TD1
TypeATX12V
Maximum Power650 W
Fans1
PFCActive
Main Connector20+4Pin
+12V Rails2
PCI-Express Connector1 x 6-Pin, 1 x 6+2-Pin
SLINo
ModularNo
Over Voltage ProtectionYes
Input Voltage100 - 120 V / 200 - 240 V
Input Frequency Range50/60 Hz
Input Current10A @ 115V, 6A @ 230V
Output+3.3V@24A,+5V@24A,+12V1@20A,+12V2@20A, +12V3@20A,+12V4@20A, [email protected] , [email protected]
ApprovalsUL, CSA, CE, CB, FCC
Connectors1 x Main connector (20+4Pin)
1 x 12V (P4)
6 x 4pin Molex
4 x SATA
1 x Floppy
2 x PCI-E
FeaturesBlack case
Low ripple and noise
100% Hi-Pot Tested
Short circuit protection on all outputs
Sūtījuma svars2.81 kg
Sūtījuma izmēri292 × 229 × 102 mm

Jautājumi par šo preci

How loud and hot does the EP-650-TD1 get when running at 650 W all day?

The unit uses a single fan and is rated for low ripple and noise; active PFC keeps input current at 10A @ 115V or 6A @ 230V, so heat output stays proportional to load.

Which cables must my case and motherboard already provide for this non-modular PSU to work?

It comes with a fixed 20+4Pin main connector, one 12V P4, six 4-pin Molex, four SATA, one floppy, one 6-pin PCIe and one 6+2-pin PCIe — no extra cables are needed.

Will the dual +12 V rails at 20 A each support an older graphics card that only needs a single 6-pin connector?

Yes — the EP-650-TD1 provides one 6-pin and one 6+2-pin PCIe connector, each fed from the +12V rails rated at 20 A, so legacy cards are fully supported.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.