EN-Labs
EN-Labs Aluminium Heatsink 14x14x10mm 20pcs DIY Cooling
Pack of 20 aluminium heatsinks, each 14x14x10mm, for cooling ICs, MOSFETs and voltage regulators
- ColorSilver
- CompatibilityMotherboard Chipsets
- MaterialAluminium
- FeaturesProduct Description Aluminum IC heatsink for Router,power tr
- Dimensions14 x 14 x 10mm
- Compact 14 by 14 millimetre footprint fits tight board layouts
- Extruded aluminium fins dissipate heat from MOSFETs and voltage regulators
- Ten millimetre height clears low-profile enclosure limits
- Twenty pieces per pack support multi-device cooling projects
- Light 55 gram total weight adds minimal mass to assemblies
Aluminium Heatsink 14x14x10mm 20pcs
This pack supplies twenty aluminium heatsinks measuring 14x14x10mm each. They are designed for DIY cooling of small electronic chips such as MOSFETs, voltage regulators and router ICs. The silver finish suits a variety of board layouts. Hobbyists and repair technicians will find the quantity convenient for multiple projects.
Extruded Fin Height 10mm
The critical dimension is the 10mm fin height which determines whether the heatsink clears adjacent components and enclosure lids. At 10mm tall the profile fits many low-profile applications but will not suit boards with tighter vertical clearance. Verify the available space above your target chip before purchase.
Pack Of Twenty For Multi Chip Boards
Twenty pieces cover boards with several discrete power devices such as FETs, SCRs or amplifier ICs. The aluminium mass provides modest thermal capacity for low to medium power dissipation. It runs out when sustained loads exceed what natural convection from this surface area can reject. Adhesive glue is required and not included.
Priekšrocības
- Compact 14 by 14 millimetre footprint fits tight board layouts
- Extruded aluminium fins dissipate heat from MOSFETs and voltage regulators
- Ten millimetre height clears low-profile enclosure limits
- Twenty pieces per pack support multi-device cooling projects
- Light 55 gram total weight adds minimal mass to assemblies
Specifikācijas
| Color | Silver |
|---|---|
| Compatibility | Motherboard Chipsets |
| Material | Aluminium |
| Features | Product Description Aluminum IC heatsink for Router,power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 14mm x 14mm x 10mm,Please check your componet careful, and make sure the size of the heatsink fits it no problem Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 14 x 14 x 10mm/ 0.55" x 0.55" x 0.4" (L*W*H) Weight: 55g Package Content: 20pcs x Heatsink |
| Dimensions | 14 x 14 x 10mm |
Jautājumi par šo preci
How much does the 14x14x10mm heatsink lower chip temperature in a real build?
The aluminium fin array adds surface area so a MOSFET or voltage regulator runs cooler, but the exact drop depends on the component's power draw and the airflow inside the case.
What mounting method does the 14x14mm base require?
Thermal adhesive glue is needed to bond the flat 14x14mm base to the IC; no clips, screws or pre-applied tape are supplied.
Will the 10mm height and 14mm footprint clear surrounding components on a crowded board?
Each sink stands 10mm tall with a 14x14mm square footprint and weighs 55g for the 20-piece pack, so measure nearby capacitors and connectors before gluing.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 $
0.00051482BTC
Krājumā