Epoch
Epoch 4TB 7.2K SAS 12Gb/s 3.5" Hard Drive Replacement Kit
A 4 TB 7.2K SAS 12Gb/s 3.5" drive kit validated for Dell PowerEdge 14 and 15 generation servers
- InterfaceSAS 12Gb/s
- Capacity4TB
- RPM7200 RPM
- UsageIdeal for Servers
- Form Factor3.5"
- 4 TB capacity stores large datasets
- 7200 RPM spindle delivers fast sequential access
- SAS 12 Gb/s interface moves data quickly
- 5 inch form factor fits standard server bays
- Compatible with Dell PowerEdge 14 and 15 generation servers
Server-Ready 4 TB SAS Drive
This 3.5 inch hard drive delivers 4 TB of storage over a SAS 12Gb/s interface at 7200 RPM. It is supplied as a replacement kit and is intended for server environments that require high-capacity, enterprise-grade disks.
SAS 12Gb/s Throughput Limit
The SAS 12Gb/s link caps sustained transfer rates at the interface maximum, so actual throughput will not exceed that ceiling. Performance also depends on the backplane and controller firmware in the host system.
Verify SAS Backplane and Tray Fit
Confirm that the target server provides a 3.5 inch SAS hot-swap bay with a 12Gb/s backplane and the correct carrier tray. The kit is validated for the listed 14th and 15th generation PowerEdge and Tower models only.
Priekšrocības
- 4 TB capacity stores large datasets
- 7200 RPM spindle delivers fast sequential access
- SAS 12 Gb/s interface moves data quickly
- 5 inch form factor fits standard server bays
- Compatible with Dell PowerEdge 14 and 15 generation servers
Specifikācijas
| Interface | SAS 12Gb/s |
|---|---|
| Capacity | 4TB |
| RPM | 7200 RPM |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
Jautājumi par šo preci
Should I pick the 4TB 7200 RPM SAS drive or a different capacity for my server?
The kit supplies a single 4TB 7200 RPM SAS 12Gb/s 3.5" drive; choose this capacity when your array or application requires exactly four terabytes of enterprise storage.
What does the 12Gb/s SAS rating deliver once the drive is installed in a PowerEdge server?
The 12Gb/s SAS interface provides up to twelve gigabits per second of host bandwidth, so sustained throughput is limited by the drive’s 7200 RPM mechanics rather than the link.
Which SAS standard does the drive use and what speed does it cap at in practice?
It uses SAS 12Gb/s, capping the host connection at twelve gigabits per second while the 7200 RPM platters determine actual read and write rates.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
