Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two black USB 3.0 to SATA adapter cables for 2.5 inch drives

ESTONE

ESTONE SATA III to USB 3.0 Adapter for 2.5in Drives, UASP, 2 Pack

SKU CH-GXSV-JZGC2

Connect 2.5" SATA drives via USB 3.0 with UASP support for faster transfers, no external power needed, two adapters included

  • Changer TypeUSB to SATA
  • Connect 2.5″ SATA drives via USB 3.0 for quick external storage
  • UASP support boosts transfer speeds up to 70% faster than standard USB 3.0
  • Portable design needs no external power for 2.5″ SSDs or HDDs
  • Plug-and-play operation lets you swap drives instantly without drivers
  • Two-pack value provides spare adapters for cloning, backup or data recovery

Portable 2.5" SATA adapter pair

This two-pack of ESTONE adapters lets you connect any 2.5" SATA hard drive or solid-state drive to a USB 3.0 port on a laptop, desktop or Ultrabook. The plug-and-play design requires no drivers and no external power, so you can add storage, run backups, clone disks or recover data wherever you work. It is aimed at technicians and mobile users who need quick, temporary access to bare drives without fitting them inside an enclosure.

UASP-accelerated USB 3.0 performance

The adapters support the USB 3.0 5 Gbps interface and, when the host also supports UASP, deliver transfer rates up to 70% faster than standard bulk-endpoint operation. Because they draw power solely from the USB bus, there is no separate power brick to carry and no fan noise to manage; thermal load stays within the limits of a 2.5" drive's normal operating envelope.

Compact cable with direct SATA connectors

Each unit presents a standard SATA data and power connector on one end and a USB 3.0 Type-A plug on the other, eliminating the need for a drive caddy or dock. The short cable keeps the setup tidy on a desk or in a laptop bag, and the two-pack allows simultaneous access to two drives for side-by-side cloning or migration tasks. Build quality is sufficient for repeated insertion cycles in field-service or home-office use.

Priekšrocības

  • Connect 2.5″ SATA drives via USB 3.0 for quick external storage
  • UASP support boosts transfer speeds up to 70% faster than standard USB 3.0
  • Portable design needs no external power for 2.5″ SSDs or HDDs
  • Plug-and-play operation lets you swap drives instantly without drivers
  • Two-pack value provides spare adapters for cloning, backup or data recovery

Specifikācijas

Changer TypeUSB to SATA
ModelFor 2.5in SATA drives

Jautājumi par šo preci

How do I install the ESTONE SATA III to USB 3.0 adapter for a 2.5in drive, and what step is often missed?

Plug the SATA connector into the 2.5in drive, then insert the USB 3.0 plug into the computer; the step often missed is confirming the host port supports UASP to reach the 70% faster transfer rate.

What maintenance or replacement will the adapter need later?

No scheduled maintenance is required; if the USB connector wears from frequent drive swaps, replace the adapter cable itself.

What limit appears first under sustained use with this adapter?

The USB 3.0 5Gbps interface ceiling is reached before the drive’s native SATA speed during long transfers.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.