Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black standalone duplicator with eleven SATA slots and a 16 x 2 LCD display

EZ Dupe, Inc.

EZ Dupe, Inc. HD Leopardo H11PROHEB 1-to-11 SATA Duplicator

SKU CH-76CT-BZJP5

Standalone SATA duplicator copies up to 11 drives at 300MB/s with four copy modes and seven erase modes including DoD 5220.22-M standards

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 11

Target 1 to 11

Data Transfer Rate 300MB/s

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • Copy 11 drives simultaneously at 300 MB/s
  • Four copy modes including quick and full duplication
  • Seven erase modes with DoD 5220.22-M compliance
  • Works with 2.5" and 3.5" SATA drives adapter-free
  • Standalone 16×2 LCD operation needs no host computer

1-to-11 SATA Duplicator for IT teams

The HD Leopardo H11PROHEB copies up to eleven 2.5 or 3.5 SATA drives simultaneously at 300MB/s without a host computer. A 16 x 2 LCD and indicator lights show progress on each slot. The Athena controller manages 128M buffer memory for steady throughput.

Four copy modes and seven erase standards

Quick Copy transfers only used space while Whole Media clones every sector. All Partitioned and Percentage modes handle undefined file systems by targeting specific regions. Erase options include Quick, Full, DoD 3-pass, DoD 7-pass, Secure Erase, Enhanced SSD Erase and HPA removal meeting 5220.22-M requirements.

Check drive count and power before ordering

The unit accepts one source and up to eleven targets so verify the batch size fits the project. It runs on 115-230 V AC at 50/60 Hz without an adapter for either drive form factor. No host connection is required, but ensure physical access to the slot-load bays for loading and unloading.

Priekšrocības

  • Copy 11 drives simultaneously at 300 MB/s
  • Four copy modes including quick and full duplication
  • Seven erase modes with DoD 5220.22-M compliance
  • Works with 2.5" and 3.5" SATA drives adapter-free
  • Standalone 16×2 LCD operation needs no host computer

Specifikācijas

BrandEZ Dupe
TypeHard Drive Duplicator
ModelHD Leopardo
Part NumberH11PROHEB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 11
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the Athena Controller need firmware updates or will the LCD panel degrade over time?

The unit has a 16 x 2 LCD and an Athena Controller; EZ Dupe provides lifetime technical support for any firmware or hardware questions.

What limits the 300 MB/s copy speed during a full-day run?

Each of the 11 target slots sustains up to 300 MB/s; the shared controller bandwidth and drive write performance set the practical ceiling.

How much heat and noise does the duplicator produce when all 11 bays run continuously?

The 115-230 V AC supply powers the unit; with 11 active SATA drives the system generates noticeable warmth and fan noise, so keep ventilation clear.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.