Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Metal axial case fan 80 by 38 mm 230 V 12 11 W

Fans

Fans 8556AMotor 230V 12/11W 80x38mm case fan

SKU CH-NGSG-E2HP7 MPN 8556AMotor

Axial case fan moves 52 m³/h at 230 V with a compact 80×38 mm metal frame

  • 80 mm axial design fits compact cases
  • 52 m³/h airflow moves heat efficiently
  • 12/11 W motor runs on 230 V mains power
  • 07 A draw keeps energy use low
  • All-metal ebm-papst construction ensures durability

Product identity

The Fans 8556AMotor is an 80 mm by 38 mm axial case fan built for 230 V mains operation. It suits technicians who need a compact metal-bodied fan for forced-air cooling inside industrial enclosures or custom server chassis.

Sustained-load behaviour

The motor draws 0.07 A and runs at either 12 W or 11 W depending on load, delivering a steady 52 m³/h of airflow. GreenTech EC circuitry provides 100 % speed control via analog or serial interface so the fan maintains consistent cooling without thermal throttling during continuous duty.

Pre-order checklist

Verify that your chassis has an 80 mm mounting pattern and 38 mm depth clearance for the all-metal frame. Confirm a 230 V AC supply is available at the installation point and that your control board can drive the analog or serial speed-control interface. Buyers who need lower-voltage DC fans or PWM-only control should look elsewhere.

Priekšrocības

  • 80 mm axial design fits compact cases
  • 52 m³/h airflow moves heat efficiently
  • 12/11 W motor runs on 230 V mains power
  • 07 A draw keeps energy use low
  • All-metal ebm-papst construction ensures durability

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How loud and how much power does the 8556A motor draw when running continuously at 230 V?

The fan is rated at 12 W / 11 W with a current of 0.07 A at 230 V. Its axial design and GreenTech EC technology keep noise low while delivering 52 m³/h airflow.

What mounting hardware or wiring must I already have to install this 80 × 38 mm axial fan?

The unit has an 80 mm square frame, 38 mm depth and standard mounting holes. You need a matching 80 mm cut-out and a 230 V AC supply; no special connector is mentioned.

Will this 8556A fan fit alongside older 80 mm case fans that use 12 V DC headers?

No. This model runs directly on 230 V AC mains power, not 12 V DC motherboard headers, so it cannot share the same fan controller or power source as typical DC case fans.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.