Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black rectangular axial fan 172 by 51 mm with metal frame and visible blades

Fans

Fans DV6224/2Motor 24V 37W 172x51mm case fan

SKU CH-HGSX-HX5WD MPN DV6224/2Motor

A 24 V axial case fan delivering 317.8 CFM from a 172 × 51 mm frame with dual-motor design

  • High airflow of 317.8 CFM for efficient cooling
  • 24 V DC operation at 1.54 A current draw
  • Compact 172 × 51 mm frame fits tight spaces
  • 37 W motor power with GreenTech EC technology
  • Original ebmpapst build with 100 % speed control

Compact axial fan for industrial cooling

This 172 × 51 mm DC axial fan delivers 317.8 CFM airflow at 24 V and 37 W motor power. It targets engineers and system integrators who need reliable forced-air cooling in space-constrained enclosures such as server racks, telecom cabinets or power electronics housings. The original ebmpapst build uses a sturdy steel frame and external-rotor motor for long service life.

Thermals noise and power draw

Rated current is 1.54 A at 24 V, giving 37 W motor power and a 41 W order-code reference. GreenTech EC technology enables 100 % speed control via analogue or serial interface so airflow and acoustic output can be matched to real-time thermal load. The compact external-rotor design keeps installation depth low while maintaining high static pressure across heat exchangers.

Upgrade path and fit

The fan replaces legacy shaded-pole or fixed-speed axial units of the same 172 mm footprint where variable-speed control and lower noise are required. It suits retrofits that need plug-and-play compatibility with existing open-loop controllers and 24 V DC bus supplies. Buyers needing higher airflow than 35 000 m³/h or a different voltage rail should evaluate alternative models.

Priekšrocības

  • High airflow of 317.8 CFM for efficient cooling
  • 24 V DC operation at 1.54 A current draw
  • Compact 172 × 51 mm frame fits tight spaces
  • 37 W motor power with GreenTech EC technology
  • Original ebmpapst build with 100 % speed control

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How do I mount the 172×51 mm frame and wire the 24 V supply without reversing polarity?

Align the four corner holes of the 172×51 mm housing with your chassis fan mounts, secure with M3 or M4 screws, then connect the red lead to +24 V and the black lead to ground; reversing the polarity will prevent the motor from starting.

Which part of the fan is most likely to need replacement after long-term operation?

The ball-bearing assembly inside the external-rotor motor is the primary wear item; expect to replace the complete fan unit once bearing noise or vibration appears.

At what airflow does the 37 W motor reach its thermal limit during continuous running?

The motor is rated for 37 W continuous input at 317.8 CFM; sustained operation at or below this airflow keeps the unit within its design temperature envelope.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.