BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00279596BTC
Krājumā
G.SKILL
G.SKILL F5-6000R3036G16GQ4-G5N 64GB (4×16GB) DDR5 6000 CL30 ECC Registered server RAM
64 GB quad-channel DDR5-6000 CL30 ECC registered kit for AMD Threadripper 7000X workstations
- Capacity64GB (4 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6000 (PC5 48000)
- CAS LatencyCL30
- Timing30-36-36-96
- Voltage1.40V
- 64 GB capacity across four 16 GB modules
- DDR5 6000 speed with CL30 latency for responsive throughput
- ECC registered design protects data integrity in critical workloads
- AMD EXPO profile enables one-click overclock on TRX50 platforms
- Hand-screened ICs tested for stability under sustained loads
Capacity and kit layout
This G.SKILL G5 Neo kit provides 64 GB of DDR5 server memory in four 16 GB registered DIMMs. It targets AMD Threadripper 7000X workstations running on TRX50 motherboards with four-channel support.
Registered ECC for stability-critical workloads
The modules carry on-die ECC and side-band ECC plus registered buffering, making them suited to content creation and rendering where data integrity matters. Builders needing unbuffered UDIMMs or consumer overclocking profiles should look elsewhere.
Sustained throughput at rated EXPO profile
Hand-screened ICs are tested at DDR5 6000 with CL30-36-36-96 timings and 1.40 V through the AMD EXPO profile. Stability at these speeds depends on motherboard QVL validation and CPU memory-controller capability.
Priekšrocības
- 64 GB capacity across four 16 GB modules
- DDR5 6000 speed with CL30 latency for responsive throughput
- ECC registered design protects data integrity in critical workloads
- AMD EXPO profile enables one-click overclock on TRX50 platforms
- Hand-screened ICs tested for stability under sustained loads
Specifikācijas
| Brand | G.SKILL |
|---|---|
| Series | G5 Neo Series |
| Model | F5-6000R3036G16GQ4-G5N |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL30 |
| Timing | 30-36-36-96 |
| Voltage | 1.40V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Multi-channel Kit | Quad Channel Kit |
| BIOS/Performance Profile | AMD EXPO |
| Chipset | AMD TRX50 Chipset |
| Heat Spreader | No |
| Features | High performance DDR5 R-DIMM memory kit Designed for use with AMD Ryzen Threadripper 7000X series processor Requires compatible AMD TRX50 motherboard w/ 4-channel support On-die ECC & side-band ECC Dedicated temperature sensors AMD EXPO Support |
| Sūtījuma svars | 0.12 kg |
| Sūtījuma izmēri | 244 × 178 × 25 mm |
Jautājumi par šo preci
Do I need an AMD TRX50 motherboard with four-channel support to run this 64 GB kit?
Yes, the kit is designed for AMD TRX50 chipset boards that provide four-channel memory architecture.
Can I mix these registered DDR5 6000 CL30 modules with older unbuffered DDR5 DIMMs?
No, registered RDIMMs cannot be used together with unbuffered UDIMMs on the same platform.
How do I confirm the kit is running at DDR5 6000 with 30-36-36-96 timings after installation?
Enable the AMD EXPO profile in BIOS and verify the reported speed and timings match 6000 MT/s and 30-36-36-96.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
