BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278045BTC
Krājumā
G.SKILL
G.SKILL F5-6400R3239F32GQ4-T5N 128GB (4x32GB) DDR5-6400 CL32 Registered ECC server RAM
128 GB quad-channel DDR5-6400 registered ECC kit with CL32 timing for Threadripper 7000X on TRX50
- Capacity128GB (4 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL32
- Timing32-39-39-102
- Voltage1.35V
- 128 GB quad-channel capacity scales multi-threaded workloads
- DDR5-6400 CL32 delivers high bandwidth at low latency
- Registered ECC with on-die and side-band protection ensures data integrity
- 35 V operation reduces power draw under load
- 16-layer PCB optimises signal integrity for Threadripper 7000X platforms
Purpose-built server memory kit
This 128GB quad-channel kit delivers registered ECC DDR5 for AMD Threadripper 7000X workstations. Four 32GB modules provide the capacity and error correction required for professional workloads. The registered design reduces electrical load on the memory controller.
Registered ECC with AMD EXPO
The modules run at DDR5-6400 with CL32-39-39-102 timings at 1.35V using the AMD EXPO profile. On-die ECC and side-band ECC protect data integrity in critical applications. A 16-layer PCB supports signal quality at this speed. Not for consumer platforms lacking registered DIMM support.
No heat spreader included
The kit ships without heatsinks, relying on chassis airflow for thermal management. Builders must ensure adequate cooling in dense TRX50 configurations. The bare modules fit tight clearance constraints where tall spreaders would interfere. Software control is handled through motherboard BIOS EXPO settings.
Priekšrocības
- 128 GB quad-channel capacity scales multi-threaded workloads
- DDR5-6400 CL32 delivers high bandwidth at low latency
- Registered ECC with on-die and side-band protection ensures data integrity
- 35 V operation reduces power draw under load
- 16-layer PCB optimises signal integrity for Threadripper 7000X platforms
Specifikācijas
| Brand | G.SKILL |
|---|---|
| Series | T5 Neo Series |
| Model | F5-6400R3239F32GQ4-T5N |
| Capacity | 128GB (4 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL32 |
| Timing | 32-39-39-102 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Multi-channel Kit | Quad Channel Kit |
| BIOS/Performance Profile | AMD EXPO |
| Heat Spreader | No |
| Features | High performance DDR5 R-DIMM memory kit 16-layer PCB design Designed for use with AMD Ryzen Threadripper 7000X series processor Requires compatible AMD TRX50 motherboard w/ 4-channel support On-die ECC & side-band ECC Dedicated temperature sensors AMD EXPO Support |
| Sūtījuma svars | 0.12 kg |
| Sūtījuma izmēri | 244 × 178 × 24 mm |
Jautājumi par šo preci
What real-world throughput does the DDR5-6400 rating deliver on a Threadripper 7000X system?
The kit runs at 6400 MT/s, providing up to 51200 MB/s per channel across four channels when the AMD EXPO profile is loaded on a compatible TRX50 motherboard.
How does the registered ECC design affect compatibility with the TRX50 platform?
Registered modules with on-die and side-band ECC are required for the quad-channel TRX50 memory controller; the 288-pin RDIMM form factor and AMD EXPO support ensure correct training at 6400 MT/s.
Will these modules fit in a standard TRX50 server chassis without a heat spreader?
Yes, the bare 16-layer PCB uses the standard 288-pin RDIMM height, so it clears typical DIMM slots and airflow ducts in TRX50 workstations and rackmounts.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
