BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00279313BTC
Krājumā
G.SKILL
G.SKILL F5-6800R3445G32GQ4-G5N 128GB (4 x 32GB) DDR5 6800 ECC Registered server RAM
128 GB quad-channel DDR5-6800 RDIMM kit with ECC and AMD EXPO for Threadripper 7000 workstations
- Capacity128GB (4 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6800 (PC5 54400)
- CAS LatencyCL34
- Timing34-45-45-108
- Voltage1.40V
- 128 GB capacity for memory-intensive workloads
- DDR5 6800 speed with AMD EXPO profile support
- ECC registered design ensures data integrity
- CL34 34-45-45-108 timings optimised for throughput
- Quad-channel 4 x 32 GB kit for TRX50 platforms
128GB Quad-Channel DDR5-6800 ECC Kit
This 128GB kit contains four 32GB DDR5-6800 RDIMMs built for AMD Threadripper 7000X workstations. Registered ECC operation and AMD EXPO profiles target professionals who need maximum bandwidth with error correction for rendering, simulation and data-intensive workloads. The modules run at CL34 34-45-45-108 timings on 1.40V.
Registered 288-Pin RDIMM Design
Each module uses a registered 288-pin DDR5 form factor without a heat spreader, relying on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, enabling stable four-channel population on TRX50 motherboards. The bare PCB layout fits dense server configurations where tall spreaders would block adjacent slots or airflow paths.
AMD EXPO Overclock Limits
Rated DDR5-6800 speed and CL34 timings are only guaranteed when the CPU memory controller and motherboard firmware support the EXPO profile. Stability at 6800 MT/s varies by silicon quality and board topology; systems that cannot sustain the profile will fall back to standard JEDEC speeds. Buyers without TRX50 platforms or Threadripper 7000X CPUs cannot reach the advertised frequency.
Priekšrocības
- 128 GB capacity for memory-intensive workloads
- DDR5 6800 speed with AMD EXPO profile support
- ECC registered design ensures data integrity
- CL34 34-45-45-108 timings optimised for throughput
- Quad-channel 4 x 32 GB kit for TRX50 platforms
Specifikācijas
| Brand | G.SKILL |
|---|---|
| Series | G5 Neo Series |
| Model | F5-6800R3445G32GQ4-G5N |
| Capacity | 128GB (4 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6800 (PC5 54400) |
| CAS Latency | CL34 |
| Timing | 34-45-45-108 |
| Voltage | 1.40V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Multi-channel Kit | Quad Channel Kit |
| BIOS/Performance Profile | AMD EXPO |
| Chipset | AMD TRX50 Chipset |
| Heat Spreader | No |
| Features | High performance DDR5 R-DIMM memory kit Designed for use with AMD Ryzen Threadripper 7000X series processor Requires compatible AMD TRX50 motherboard w/ 4-channel support On-die ECC & side-band ECC Dedicated temperature sensors AMD EXPO Support |
| Sūtījuma svars | 0.27 kg |
| Sūtījuma izmēri | 244 × 178 × 23 mm |
Jautājumi par šo preci
Does this DDR5 6800 kit run at the rated speed through AMD EXPO on a TRX50 motherboard?
The kit uses an AMD EXPO profile to reach DDR5 6800 with CL34-45-45-108 timings at 1.40 V. Stable operation depends on the motherboard QVL and the CPU memory controller.
What physical slot and channel layout do the four 32 GB RDIMMs require?
Four 288-pin DDR5 RDIMM modules fill a quad-channel configuration on a compatible AMD TRX50 motherboard with four memory slots.
How do I enable the rated 6800 MT/s speed after installing the modules?
Enter the BIOS, select the AMD EXPO profile for this kit, save and reboot; skipping the EXPO step leaves the modules at JEDEC default speeds.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
