BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
G.SKILL
32 GB dual-channel DDR4 kit running at 2400 MT/s with CL15 latency for AMD Ryzen systems
This FORTIS Series kit provides 32GB of desktop memory across two matched 16GB modules. It runs at DDR4 2400 with a CAS latency of CL15 and timings of 15-15-15-39 at 1.20V. The modules use standard 288-pin unbuffered non-ECC DIMMs and include Intel XMP 2.0 support for simple configuration.
The kit is validated for AMD X370, B350 and A320 chipsets, making it a direct fit for Ryzen-based systems. Builders using Intel platforms or newer AMD chipsets not listed here should verify compatibility before purchasing. Mixing this kit with other memory sets is not recommended by the manufacturer.
The decisive specification is the DDR4 2400 speed combined with CL15 latency at the standard 1.20V operating voltage. This balance of frequency and tight timing determines whether the kit matches your motherboard's supported memory profile and your performance targets.
| Brand | G.SKILL |
|---|---|
| Series | FORTIS Series |
| Model | F4-2400C15D-32GFT |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL15 |
| Timing | 15-15-15-39 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | AMD X370 / B350 / A320 |
| Color | Black |
| Heat Spreader | No |
| Features | Overclock performance DDR4 memory designed for compatible AMD AM4 platforms. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the rated XMP overclock speed and system stabilit |
| Sūtījuma svars | 0.11 kg |
| Sūtījuma izmēri | 152 × 117 × 13 mm |
Yes, the modules are 288-pin DDR4 DIMMs, the standard form factor for desktop boards that support DDR4 memory.
Enable the Intel XMP 2.0 profile in the BIOS; the kit is programmed with that profile for 2400 MT/s at 15-15-15-39 timings.
The manufacturer advises against mixing kits; matched pairs are tested to run together, so adding a single module may cause instability.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?