Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two red aluminium heatspreader DDR4 modules in a dual channel kit

G.SKILL

G.SKILL Ripjaws V 16GB (2 x 8GB) DDR4 3200 CL16 desktop RAM F4-3200C16D-16GVRB

SKU CH-JE2M-MWDD1 MPN F4-3200C16D-16GVRB

Dual-channel 16 GB DDR4 kit at 3200 MT/s with CL16 timing, 1.35 V operation, aluminium heatspreaders and Intel XMP 2.0 support

  • Capacity16GB (2 x 8GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL16
  • Timing16-18-18-38
  • Voltage1.35V

Capacity 16GB (2 x 8GB)

Speed DDR4 3200 (PC4 25600)

CAS Latency · Color · Fan Included CL16 · Red · No

  • 16 GB dual-channel kit gives ample capacity for gaming and content creation
  • DDR4 3200 speed with CL16 timing delivers responsive system performance
  • 35 V operation keeps power draw low while maintaining stability
  • 42 mm module height fits under most oversized CPU coolers
  • Intel XMP 2.0 profile enables one-click overclock setup

Ripjaws V DDR4 3200 kit

This 16GB dual-channel kit contains two 8GB DDR4 modules rated at 3200MT/s with CL16 timings. It runs at 1.35V and supports Intel XMP 2.0 for automatic configuration on compatible boards.

Matched 16GB for Intel DDR4 platforms

The kit is validated for Intel Z170 through Z790 DDR4 chipsets and AMD X470, X570, B450 and B550 platforms. Builders using other chipsets or mixing with existing modules should choose a different kit.

3200MT/s CL16 at 1.35V

The decisive specification is the 3200MT/s speed with 16-18-18-38 timings at 1.35V. If your motherboard and CPU support this data rate and voltage the kit will operate at its rated profile.

Priekšrocības

  • 16 GB dual-channel kit gives ample capacity for gaming and content creation
  • DDR4 3200 speed with CL16 timing delivers responsive system performance
  • 35 V operation keeps power draw low while maintaining stability
  • 42 mm module height fits under most oversized CPU coolers
  • Intel XMP 2.0 profile enables one-click overclock setup

Specifikācijas

BrandG.SKILL
SeriesRipjaws V Series
ModelF4-3200C16D-16GVRB
Capacity16GB (2 x 8GB)
Type288-Pin PC RAM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL16
Timing16-18-18-38
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorRed
Heat SpreaderYes
FeaturesOverclock performance DDR4 memory designed for compatible Intel platforms.
Sleek and stylish aluminum heatspreader design.
Intel XMP 2.0 support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the
Recommend UseAMD X570 / X470 / B550 / B450
Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170
Sūtījuma svars0.13 kg
Sūtījuma izmēri204 × 137 × 17 mm

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the DDR4 3200 kit run at 3200 MT/s with XMP 2.0 enabled?

Yes, the kit is rated DDR4 3200 (PC4 25600) and uses Intel XMP 2.0 to reach that speed at CL16 16-18-18-38 timing with 1.35V.

Will the 42mm tall modules clear a large air cooler?

The Ripjaws V sticks measure 42mm high, a height designed to fit under most oversized CPU heatsinks without interference.

How do I get the rated 3200 MT/s instead of the default JEDEC speed?

Enter the BIOS, enable the XMP 2.0 profile for this kit, save and reboot — the memory will then run at 3200 MT/s with CL16 timings.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.