BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277988BTC
Krājumā
G.SKILL
G.SKILL Trident Z RGB F4-3200C16D-16GTZRX 16GB DDR4 3200 CL16 desktop RAM
16 GB dual-channel DDR4 kit running at 3200 MT/s with CL16 timing and full-length RGB light bar
- Capacity16GB (2 x 8GB)
- Type288-Pin PC RAM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL16
- Timing16-18-18-38
- Voltage1.35V
- Optimised for AMD Ryzen platforms with X570, X470 and B550 chipsets
- Dual-channel 16 GB kit (2 × 8 GB) for balanced throughput
- DDR4 3200 at CL16 16-18-18-38 timing for responsive performance
- 35 V operation reduces power draw and heat
- Full-length RGB light bar with fluid rainbow wave default effect
AMD-optimised DDR4 kit
This 16 GB dual-channel kit targets AMD Ryzen systems running X570, X470 or B550 motherboards. Two 8 GB modules operate at DDR4 3200 with CL16 timings and 1.35 V. A full-length RGB light bar and aluminium heatspreaders are included.
Suits AMD builds; Intel users check compatibility
Ryzen owners gain plug-and-play XMP 2.0 profiles on supported chipsets. Intel Z790 DDR4, Z690 DDR4, Z590 and Z490 platforms are also listed. Builders on older or unsupported chipsets should verify motherboard QVL before purchase.
RGB software and screened ICs change the experience
Downloadable software replaces the default fluid rainbow wave with custom colours and effects. Hand-screened ICs on a custom 10-layer PCB aim to improve overclocking headroom while the exposed light bar keeps the diffuser fully visible.
Priekšrocības
- Optimised for AMD Ryzen platforms with X570, X470 and B550 chipsets
- Dual-channel 16 GB kit (2 × 8 GB) for balanced throughput
- DDR4 3200 at CL16 16-18-18-38 timing for responsive performance
- 35 V operation reduces power draw and heat
- Full-length RGB light bar with fluid rainbow wave default effect
Specifikācijas
| Brand | G.SKILL |
|---|---|
| Series | Trident Z RGB (For AMD) |
| Model | F4-3200C16D-16GTZRX |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL16 |
| Timing | 16-18-18-38 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Completely uncovered, full-length light bar. Fluid rainbow wave default lighting effect. Hand-screened ICs and custom 10-layer PCB for improved overclock performance. Luxurious hair-line finish aluminum heatspreaders with aggressive fin design. Intel XMP 2.0 Support Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to |
| Recommend Use | AMD X570 / X470 / B550 Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490 |
| LED Color | RGB |
| Sūtījuma svars | 0.19 kg |
| Sūtījuma izmēri | 160 × 135 × 15 mm |
Jautājumi par šo preci
Does my motherboard need an XMP 2.0 capable BIOS to run this kit at its rated 3200 MT/s CL16?
Yes, the kit carries an Intel XMP 2.0 profile that sets 3200 MT/s with 16-18-18-38 timings at 1.35 V; without XMP support the modules will fall back to the standard JEDEC speed.
Can I keep my existing DDR4 modules and add this 2 x 8 GB dual-channel kit alongside them?
Mixing kits is possible but not guaranteed; for best stability populate all slots with identical 3200 MT/s CL16 1.35 V modules or run this kit alone in the primary dual-channel slots.
How do I confirm the RGB lighting and 3200 MT/s speed are active after installation?
Enter the BIOS and verify the memory frequency reads 3200 MT/s with 16-18-18-38 timings; the light bar will display a fluid rainbow wave by default, and G.SKILL software can customise effects.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
