BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
G.SKILL
32 GB dual-channel DDR4 kit running at 4000 MT/s with CL16 timings, gold heatspreaders and a crystalline RGB light bar
This 32 GB dual-channel kit uses two 16 GB unbuffered modules rated at DDR4 4000 with CL16 timings and a 1.40 V operating voltage. The gold aluminium heatspreaders and crystalline light bar add distinctive RGB illumination to a desktop build.
The kit is validated for Intel Z590 and Z490 motherboards running dual-channel configurations at the rated speed. It is not suited for systems that require ECC or registered memory, nor for platforms limited to lower DDR4 speeds or single-channel operation.
The modules follow the standard 288-pin DDR4 form factor and are specified for PC4 32000 data rates with 16-16-16-36 timings. Verifying that the motherboard and CPU memory controller support this frequency and voltage is the decisive step before purchase.
| Brand | G.SKILL |
|---|---|
| Series | Trident Z Royal Series |
| Model | F4-4000C16D-32GTRGA |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 4000 (PC4 32000) |
| CAS Latency | CL16 |
| Timing | 16-16-16-36 |
| Voltage | 1.40V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Gold |
| Heat Spreader | Yes |
| Features | Unique crystalline light bar design. Mirrored-finish aluminum heatspreaders in gold or silver. Fluid rainbow wave default lighting effect. Hand-screened IC & custom 10-layer PCB for improved overclock performance. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP |
| Recommend Use | Intel Z590 / Z490 |
| LED Color | RGB |
| Sūtījuma svars | 0.25 kg |
| Sūtījuma izmēri | 175 × 135 × 22 mm |
The kit uses standard 288-pin DDR4 modules. The gold heatspreaders and light bar add height, so verify your CPU cooler clearance before installing.
Enter the BIOS and load the XMP profile. The common mistake is leaving the memory at the default JEDEC speed instead of activating the 4000 MT/s profile.
The 8-zone RGB LEDs are soldered to the module and rated for the product lifetime. No user-serviceable parts exist; if lighting fails, the module would be replaced under warranty.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?