Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
White micro-ATX tower with tinted tempered glass side panel and front aluminum accent

GAMDIAS Technology

GAMDIAS Technology MARS E2 White Micro-ATX PC Case

SKU CH-X1XH-JPRZH

A white Micro-ATX chassis with a magnetic tempered-glass side panel, pre-installed rear 120 mm fan, top magnetic dust filter, and clearance for 350 mm graphics cards and 165 mm CPU coolers

  • TypeMicro ATX / Mini-ITX
  • ColorArctic White
  • Case MaterialABS / Aluminum / Steel
  • Power Supply MountedBottom
  • Side Panelwith Side Window
  • LEDNo
  • Fits micro-ATX and Mini-ITX boards for compact builds
  • Tempered glass side panel with magnetic closure shows internals
  • Rear 120mm fan included, supports up to five fans total
  • Top magnetic dust filter keeps interior clean during operation
  • GPU clearance up to 350mm and CPU cooler height up to 165mm

Compact Micro-ATX Chassis

The GAMDIAS MARS E2 White is a micro-ATX and mini-ITX case finished in Arctic White. It uses ABS, aluminum and steel construction with a bottom-mounted power supply position. A tinted tempered glass side panel attaches with magnetic closure for quick access to the interior. The black internal frame and PSU shroud keep cables and power-supply heat out of sight.

Included Cooling and Filtration

One rear 120 mm black fan ships pre-installed and the case supports up to five fans in total. A magnetic dust filter sits at the top of the chassis. Front and top mounting points each accept a 240 mm radiator, while fan mounts accept up to 140 mm units. These provisions let builders choose air or liquid cooling without adding parts.

Straightforward Build Experience

The hinged glass panel swings open without tools, making component installation and cable routing simple. Maximum graphics-card length is 350 mm and CPU cooler height is limited to 165 mm, so longer cards or taller coolers will not fit. Power supplies longer than 160 mm are also incompatible, and only one internal 3.5-inch bay plus one 2.5-inch bay are available for storage.

Priekšrocības

  • Fits micro-ATX and Mini-ITX boards for compact builds
  • Tempered glass side panel with magnetic closure shows internals
  • Rear 120mm fan included, supports up to five fans total
  • Top magnetic dust filter keeps interior clean during operation
  • GPU clearance up to 350mm and CPU cooler height up to 165mm

Specifikācijas

TypeMicro ATX / Mini-ITX
ColorArctic White
Case MaterialABS / Aluminum / Steel
Power Supply MountedBottom
Side Panelwith Side Window
LEDNo
Dust FiltersTop
External 3.5" Drive Bays2
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays1
120mm Fans1
Max GPU Length350mm
Max CPU Cooler Height165mm
Max PSU Length160 mm
Dimensions15.6" x 8.3" 16.7"
Weight12.4 lbs

Jautājumi par šo preci

How often will the top magnetic dust filter need cleaning?

The magnetic dust filter on the top panel lifts off for cleaning; frequency depends on your environment, but monthly checks keep airflow steady.

What is the maximum graphics card length the case can hold?

The chassis fits GPUs up to 350 mm long, matching the 350 mm clearance stated for the Mars E2.

How loud is the included 120 mm rear fan during all-day operation?

The single pre-installed 120 mm rear fan runs at standard speed; noise level will vary with system load and any additional fans you add.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.