Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
19-piece 3D printing deburring kit with thick knurled handle, 11 HSS blades, diamond files, flush cutters and needle-nose pliers

Generic 19-Piece 3D Printing Deburring Kit with 11 HSS Blades

SKU CH-NN8T-HAS2M

A 19-piece deburring kit with 11 HSS blades, diamond files and pliers for cleaning 3D prints, metal and PVC

  • Specificationdeburring20260515, 7.87 L x 5.5 W x 0.86 H inches
  • Reduced hand fatigue during long sessions with 5.12 in thickened knurled handle
  • Quick blade changes via spring-loaded locking ring on deburring tool
  • Clean burrs on curved and flat surfaces with 11 M2 HSS blades rotating 360°
  • Reach tight print areas using precision flush cutters and needle-nose pliers
  • Complete 19-piece kit includes diamond files, shear and pliers for post-processing

19-piece deburring kit for 3D prints

This 19-piece kit is built for 3D printing post-processing. It contains an upgraded handle, eleven M2 high-speed steel blades, five diamond files, a flat shear and a needle-nose plier. The set removes support structures, skirts and burrs from resin, metal, PVC and copper parts. Makers who finish prints regularly will find every tool in one box.

Suited for multi-material finishing.

The assortment covers curved and flat surfaces on printed models, pipes and soft metals. Builders who only trim filament once in a while may not need the full blade range. Workshops that need powered deburring or large-capacity chamfering should look at dedicated bench equipment instead.

11 swivelling M2 HSS blades with 360° rotation

Eleven precision-quenched M2 high-speed steel blades mount on a spring-loaded locking head that rotates 360 degrees. Two blade geometries address both curved and flat edges. This blade count and swivel action determine whether the kit matches the variety of contours on your printed parts.

Priekšrocības

  • Reduced hand fatigue during long sessions with 5.12 in thickened knurled handle
  • Quick blade changes via spring-loaded locking ring on deburring tool
  • Clean burrs on curved and flat surfaces with 11 M2 HSS blades rotating 360°
  • Reach tight print areas using precision flush cutters and needle-nose pliers
  • Complete 19-piece kit includes diamond files, shear and pliers for post-processing

Specifikācijas

BrandGeneric, generic
Modeldeburring20260515
Part Numberdeburring20260515
Specificationdeburring20260515, 7.87 L x 5.5 W x 0.86 H inches

Jautājumi par šo preci

How many HSS blades will need replacing over time?

The kit includes 11 M2 high-speed steel blades in two geometries for curved and flat surfaces. They are precision-quenched and rotate 360° on the handle axis. Replace individual blades when cutting edges dull from extended use on metal, resin or PVC.

What limits continuous use before hand fatigue sets in?

The upgraded handle measures 5.12 in long and 0.71 in diameter with a thickened knurled aluminium grip designed to disperse pressure. A spring-loaded locking ring secures blades for quick changes during long post-processing sessions.

How much heat or noise does the tool generate during all-day finishing?

This is a manual deburring set with no motor, so it produces no heat or audible noise. The 5.4 in anti-fatigue handle and 360° swivel head reduce effort when removing supports, skirts and burrs from 3D prints.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.