GIGABYTE GP-AG41TB 1TB M.2 2280 PCIe 4.0 x4 NVMe internal SSD
- Internal Solid Stat…
- Consumer
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
GIGABYTE
500 GB M.2 2280 NVMe drive with PCIe 4.0 x4, 5000 MB/s read, 2500 MB/s write and a built‑in heatsink
The GP-AG4500G is an internal solid state drive built for consumer PCs that need fast storage in the M.2 2280 form factor. It uses the PCI-Express 4.0 x4 interface with NVMe 1.3 to deliver high throughput for games, applications and large file transfers. The 500GB capacity fits operating systems and active project files in a single drive.
The drive employs 96-layer 3D TLC flash managed by a Phison PS5016-E16 controller fabricated on a 28nm process with eight channels and 32 CE targets. An onboard 512MB DDR4 cache and a pre-fitted heatsink help sustain performance during heavy workloads while keeping operating temperatures within the 0°C to 70°C range. TRIM, S.M.A.R.T., wear levelling and over-provisioning are supported for long-term reliability.
These peak speeds define whether the GP-AG4500G matches the performance target of a PCIe 4.0 platform. Random read reaches 400000 IOPS and random write 550000 IOPS for responsive multitasking. Active power draw is rated at 5.9W read and 4.5W write, dropping to 13.21 mW at idle.
| Brand | GIGABYTE |
|---|---|
| Series | AORUS Gen4 |
| Model | GP-AG4500G |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 500GB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 4.0 x4, NVMe 1.3 |
| Controller | Phison PS5016-E16 |
| Cache | DDR4 512MB |
| Max Sequential Read | Up to 5000 MBps |
| Max Sequential Write | Up to 2500 MBps |
| 4KB Random Read | Up to 400,000 IOPS |
| 4KB Random Write | Up to 550,000 IOPS |
| MTBF | 1.77 million hours |
| HeatSink | with HeatSink |
| Power Consumption (Idle) | 13.21 mW |
| Power Consumption (Active) | R: 5.9W; W: 4.5W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 2.30mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Sūtījuma svars | 0.07 kg |
| Sūtījuma izmēri | 130 × 76 × 32 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Yes, the Phison PS5016-E16 controller on a PCIe 4.0 x4 link with NVMe 1.3 sets the practical ceiling at the quoted 5000 MB/s sequential read and 2500 MB/s sequential write figures under ideal conditions.
It fits a standard M.2 2280 key-M slot; the pre-installed heatsink increases the Z-height so confirm your motherboard or laptop has enough vertical clearance above the slot.
Removing the protective film from the thermal pads on the heatsink before securing the drive; leaving the film on blocks heat transfer and can cause throttling.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?