Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular 2.5 inch SSD, matte black metal casing, SATA connectors visible

GUDGA

GUDGA GS 128GB 2.5" SATA internal SSD

SKU CH-AN62-N7G13

A 2.5 inch SATA internal SSD with 128GB capacity, 3D TLC NAND, up to 550MB/s read and 500MB/s write speeds, 75TB TBW endurance, and 1,000,000 hours MTBF for PC or laptop storage upgrades

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form Factor2.5"
  • Capacity128GB
  • Memory Components3D TLC
  • InterfaceSATA III

Style SATAIII

Options 128GB

  • Fast boot and load times with 550MB/s read speed
  • Responsive file saves backed by 500MB/s write speed
  • Near-instant data access at 0.1ms seek time
  • Durable 3D TLC NAND rated for 75TB written
  • Reliable operation proven by 1,000,000-hour MTBF

GUDGA GS 128GB 2.5" SATA SSD

This GUDGA GS series drive is a 2.5 inch internal solid state drive with a 128GB capacity. It uses a SATA III interface and 3D TLC NAND flash memory. The drive is designed for consumer use in PCs, laptops and desktops.

Suits SATA upgrades and light workloads

This drive suits users upgrading older laptops or desktops that only support SATA storage. It fits 7mm drive bays in notebooks, mini PCs and all-in-one systems. Users needing higher capacities or faster transfer speeds should look at other options.

128GB capacity with 75TB endurance

The single specification that decides fit is the 128GB capacity combined with a 75TB TBW rating. Sequential reads reach 550MB/s and writes reach 500MB/s. The drive operates from 0°C to 70°C with a 1,000,000 hour MTBF.

Priekšrocības

  • Fast boot and load times with 550MB/s read speed
  • Responsive file saves backed by 500MB/s write speed
  • Near-instant data access at 0.1ms seek time
  • Durable 3D TLC NAND rated for 75TB written
  • Reliable operation proven by 1,000,000-hour MTBF

Specifikācijas

BrandGUDGA
SeriesGS
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form Factor2.5"
Capacity128GB
Memory Components3D TLC
InterfaceSATA III
ProtocolSATA
Max Sequential Read550MB/s
Max Sequential Write500MB/s
Seek Time0.1 ms
Terabytes Written (TBW)75TB
MTBF1,000,000 hours
HeatSinkwithout HeatSink
Operating Temperature0°C ~ +70°C
Storage Temperature-20°C ~ +70°C
Height7.00mm
Width69.85mm
Depth100.00mm

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Do I need a 2.5-inch drive bay and a SATA data cable plus 5 V power to install this 128 GB GS SSD?

Yes — the drive is a 7 mm 2.5" SATA III unit that plugs into a standard SATA data port and a 5 V SATA power connector.

Will this GS 128 GB SATA III drive work in a laptop that only supports SATA II 3 Gbps?

It will operate at the SATA II link speed, so sequential reads and writes will be limited to the 3 Gbps ceiling of the older controller.

How can I confirm the GS 128 GB SSD is delivering its rated 550 MB/s read and 500 MB/s write after installation?

Run a SATA‑capable benchmark such as CrystalDiskMark on a fresh NTFS partition and compare the sequential results to the 550 / 500 MB/s specifications.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.