Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with black chips, M.2 2280 form factor

GUDGA

GUDGA M.2 2280 NVMe 1TB internal SSD

SKU CH-EHG4-0TTGS

1 TB PCIe 3.0 x4 NVMe M.2 2280 SSD with 2100 MB/s read and 1600 MB/s write speeds

  • Device TypeInternal Solid State Drive (SSD)
  • ConnectorM.2 2280,PCIe 3.0 x4 NVMe
  • ControllerOther
  • Max Sequential Read2100 MB/s
  • Max Sequential Write1600 MB/s
  • Sustained Sequential Read1900 MB/s

Options 1TB

  • Sequential reads up to 2100 MB/s for fast boot and load times
  • Sustained writes at 1450 MB/s keep large file transfers steady
  • Random read performance of 280K IOPS speeds up everyday multitasking
  • 3D TLC NAND and 2,000,000-hour MTBF support long-term reliability
  • M.2 2280 form factor fits laptops and small-form-factor desktops

GUDGA M.2 2280 NVMe 1TB

The GUDGA M.2 2280 NVMe 1TB is an internal solid state drive built for PCs and laptops. It uses a PCIe 3.0 x4 NVMe interface and 3D TLC NAND flash in the standard 2280 form factor. Sequential speeds reach 2100 MB/s read and 1600 MB/s write with sustained rates of 1900 MB/s and 1450 MB/s.

Suits compact builds; not for legacy slots

This drive fits laptops and small form factor desktops with an M-key M.2 slot wired for PCIe 3.0 x4. Random performance hits 280K read IOPS and 250K write IOPS. Systems limited to PCIe 2.0 lanes or older M-key implementations will not reach the rated throughput.

PCIe 3.0 x4 NVMe interface decides fit

The single specification that determines compatibility is the PCIe 3.0 x4 NVMe connection on an M-key M.2 2280 slot. MTBF is rated at 2,000,000 hours. Usable capacity appears near 930 GB due to binary versus decimal calculation.

Priekšrocības

  • Sequential reads up to 2100 MB/s for fast boot and load times
  • Sustained writes at 1450 MB/s keep large file transfers steady
  • Random read performance of 280K IOPS speeds up everyday multitasking
  • 3D TLC NAND and 2,000,000-hour MTBF support long-term reliability
  • M.2 2280 form factor fits laptops and small-form-factor desktops

Specifikācijas

Device TypeInternal Solid State Drive (SSD)
ConnectorM.2 2280,PCIe 3.0 x4 NVMe
ControllerOther
Max Sequential Read2100 MB/s
Max Sequential Write1600 MB/s
Sustained Sequential Read1900 MB/s
Sustained Sequential Write1450 MB/s
4KB Random Read280K IOPS
4KB Random Write250K IOPS

Citas šī modeļa versijas

Vēl 3 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will this M.2 2280 NVMe drive fit in my laptop's M.2 slot?

The drive uses the M.2 2280 form factor which is 80 mm long. Check that your laptop has an M-key M.2 slot supporting PCIe 3.0 x4 NVMe before buying.

What usable capacity should I expect from the 1 TB model?

The supplier notes that operating systems report about 930 GB usable space because they calculate capacity in binary (1 GB = 1024 MB) while the drive is labelled in decimal (1 GB = 1000 MB).

How fast are the sustained speeds for everyday workloads?

Sustained sequential read reaches 1900 MB/s and sustained sequential write reaches 1450 MB/s, with 4 KB random read at 280K IOPS and random write at 250K IOPS.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.