Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular silver ATX power supply, reduced depth, single fan grille, 24-pin and SATA cables visible

Gulfe

Gulfe ATX Power Supply 5.86" x 3.3" 24-pin SATA H8 1011NL 1012IT 1020NL

SKU CH-EYB5-P5BJ3

Replaces legacy HP Pavilion desktop power supplies with a reduced-depth ATX unit offering 24-pin, 4-pin, SATA and peripheral connectors

  • TypeATX
  • Fans1
  • Weight2.5
  • Replaces legacy HP Pavilion desktops H8 1011NL 1012IT 1020NL
  • ATX reduced depth 5.86" x 3.3" fits tight chassis
  • 24-pin ATX plus 4-pin P4 12V for motherboard power
  • Three SATA 15-pin connectors support multiple drives
  • Over-current and over-power protection safeguards components

What this power supply fits

This Gulfe ATX unit is built as a direct replacement for HP Pavilion Desktop models H8 1011NL 1012IT and 1020NL. Its reduced-depth chassis measures 5.86 inches by 3.3 inches, allowing it to slide into tight legacy cases where a full-length PSU would not fit. The 24-pin ATX connector, a 4-pin P4-12V plug, three SATA power leads, two LP4 connectors and one floppy connector cover the typical drive and motherboard needs of those systems.

Check your case and cables before ordering

Verify that your chassis can accept a power supply 5.86 inches deep and 3.3 inches wide, as the reduced depth is the critical clearance dimension. Confirm the motherboard uses a standard 24-pin ATX main connector and a 4-pin P4-12V CPU power plug; some older boards may only have a 20-pin main socket, in which case the 20+4 pin design still works. Ensure the three SATA, two LP4 and single floppy connectors match the drives you plan to power.

Replaces legacy units in compact HP desktops

This supply swaps in for the original equipment power supply used in the listed Pavilion H8 desktops, restoring reliable power with over-current and over-power protection. The jump is worth it when the old unit has failed, shows voltage instability or lacks the SATA connectors needed for newer drives. It is not for builders who need higher wattage than the original design, modular cabling, or a standard-depth ATX form factor for full-size cases.

Priekšrocības

  • Replaces legacy HP Pavilion desktops H8 1011NL 1012IT 1020NL
  • ATX reduced depth 5.86" x 3.3" fits tight chassis
  • 24-pin ATX plus 4-pin P4 12V for motherboard power
  • Three SATA 15-pin connectors support multiple drives
  • Over-current and over-power protection safeguards components

Specifikācijas

BrandGulfe
TypeATX
Fans1
Weight2.5

Jautājumi par šo preci

Does the box include every cable needed for a typical desktop build, or must I purchase extra SATA or floppy leads?

The unit ships with one 24-pin ATX, one 4-pin P4, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin connector, covering most legacy and current drives without extra cables.

The title lists H8 1011NL 1012IT 1020NL — which of these model numbers matches my HP Pavilion?

All three model numbers are supported; choose the one printed on your original power-supply label to confirm an exact replacement.

What does the 17 ms hold-up time mean for my system during a brief power dip?

It guarantees the PSU maintains regulated output for at least 17 milliseconds at nominal load, giving the motherboard time to ride through short interruptions.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.