HP
HP 632492-B21-R 2.5" 200GB SAS enterprise SSD
A 2.5" 200GB SAS enterprise SSD using SLC memory components for performance workloads
- Form Factor2.5"
- Capacity200GB
- Memory ComponentsSLC
- InterfaceSAS 6Gb/s
- Enterprise-grade reliability with SLC memory components
- High-speed data transfer via SAS 6Gb/s interface
- Compact 2.5" form factor fits dense server bays
- 200GB capacity for critical workloads
- Refurbished condition extends hardware lifecycle
HP 2.5" 200GB SAS SLC SSD
This HP 632492-B21-R is a refurbished enterprise solid-state drive with a 2.5-inch form factor and a 200GB capacity. It uses a SAS 6Gb/s interface and SLC memory components for endurance. The drive suits servers and storage arrays that require this specific interface and form factor.
Suits SAS 6Gb/s 2.5" bays; not for other interfaces
This SSD fits systems with 2.5-inch drive bays and a SAS 6Gb/s backplane or controller. It is not for platforms that lack SAS connectivity or that require a different physical form factor. Buyers needing a different capacity or interface should look at other models.
SAS 6Gb/s interface decides compatibility
The single specification that determines whether this is the correct part is the SAS 6Gb/s interface. The host system must provide a compatible SAS port and 2.5-inch bay for the drive to function. Verify the controller and backplane support this interface before purchase.
Priekšrocības
- Enterprise-grade reliability with SLC memory components
- High-speed data transfer via SAS 6Gb/s interface
- Compact 2.5" form factor fits dense server bays
- 200GB capacity for critical workloads
- Refurbished condition extends hardware lifecycle
Specifikācijas
| Brand | HP |
|---|---|
| Model | 632492-B21-R |
| Form Factor | 2.5" |
| Capacity | 200GB |
| Memory Components | SLC |
| Interface | SAS 6Gb/s |
| Sūtījuma svars | 0.45 kg |
| Sūtījuma izmēri | 254 × 203 × 127 mm |
Jautājumi par šo preci
What server or controller do I need to run a SAS 6Gb/s 2.5" 200GB SLC enterprise SSD?
A server or RAID controller with a SAS 6Gb/s backplane that accepts 2.5" drives and can address 200 GB of SLC NAND.
Can this SAS 6Gb/s SLC drive share a backplane with older 3Gb/s SAS HDDs?
Yes, the 6Gb/s interface negotiates down to 3Gb/s so the SSD will operate alongside legacy SAS disks on the same backplane.
How do I verify the 200GB SLC drive is healthy after installation?
Check SMART attributes for media wear and reallocated sectors; SLC endurance should show minimal wear even after heavy use.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
