Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 1U rack server with eight 2.5-inch drive bays on the front

HP

HP ProLiant DL160 Gen9 1U rack server 2× Xeon E5-2623 v3 3 GHz 16 GB DDR4 2× 500 GB SATA B140i

SKU CH-3CM0-HA5MH

1U rack server with dual Xeon E5-2623 v3 CPUs, 16 GB DDR4, two 500 GB SATA drives and B140i software RAID

  • TypeRack
  • Rack Height1U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon E5 v3
  • MAX Processors2
  • ChipsetIntel C610

Installed Memory Size 16GB

HDD 2 x 500GB

  • Dual Xeon E5-2623 v3 processors deliver 16 virtual cores for parallel workloads
  • 16 GB DDR4 ECC registered memory protects data integrity in 16 DIMM slots
  • Two 500 GB 7.2K SATA drives provide 1 TB raw capacity in 2.5-inch bays
  • B140i software RAID supports levels 0, 1, 5 for SATA redundancy
  • Redundant hot-swap 550 W power supplies maintain uptime during module replacement

HP ProLiant DL160 Gen9 1U rack server

The HP ProLiant DL160 Gen9 is a 1U rack server built for general-purpose workloads. It ships with two Intel Xeon E5-2623 v3 processors running at 3 GHz, 16 GB of DDR4 memory, and two 500 GB 7.2K SATA drives. The B140i controller provides software RAID 0, 1, and 5 for SATA devices only.

Teams needing balanced compute in a 1U form factor

This configuration suits teams that need dual-processor performance in a single rack unit with redundant hot-swap power. It is not suited for buyers who require hardware RAID, SAS drive support, a discrete graphics processor, or installed solid-state storage. The Matrox G200 GPU handles basic display output only.

B140i software RAID limited to SATA drives

The storage controller supports RAID 0, 1, and 5 exclusively on SATA drives. It does not support SAS or other drive interfaces. This single constraint determines whether the server matches your storage architecture.

Priekšrocības

  • Dual Xeon E5-2623 v3 processors deliver 16 virtual cores for parallel workloads
  • 16 GB DDR4 ECC registered memory protects data integrity in 16 DIMM slots
  • Two 500 GB 7.2K SATA drives provide 1 TB raw capacity in 2.5-inch bays
  • B140i software RAID supports levels 0, 1, 5 for SATA redundancy
  • Redundant hot-swap 550 W power supplies maintain uptime during module replacement

Specifikācijas

BrandHP
SeriesProLiant
ModelProliant DL160 G9
TypeRack
Rack Height1U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon E5 v3
MAX Processors2
ChipsetIntel C610
Installed Memory Size16GB
Memory TypeDDR4
Max Memory Capacity16GB
Memory Features16 DIMM slots, 8 per processor. (4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s ECC Registered, actual memory speed dependent on the processor capability).
Number of Memory Slots16
Storage ControllerB140i Software RAID
HDD InterfaceSATA
SSD (Installed)No
Raid Level0,1,5
Media DrivesNone
GPU TypeMatrox G200
Video Memory16MB
Remote ManagementiLO Management (standard).
LAN Ports2 x Ports
Expansion SlotsCPU1 PCIe Riser 1: 2 PCIe 3.0 Slots (1 & 2) available: 1x Full-Height Half Length, 1x Low Profile slot. Optional kit available to install Flexible LOM in slot 1. CPU 2 Riser (Optional): PCIe 3.0 slot 3 - Full-Height Half Height (Secondary PCIe Riser and dual CPU required).
Operating SystemNo
Compatible/Certified OSMicrosoft Windows Small Business Server 2011/2008, Microsoft Windows Server 2008 R2 SP1/SP2, Microsoft Windows HPC Server 2008 R2, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, Oracle Solaris
Weight63.0000LBS

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the two 500 GB SATA drives and the B140i controller, and what step is often missed?

Slide the 2.5 inch drives into the front SFF bays, connect the SATA cables to the B140i ports on the system board, then create the RAID 0, 1 or 5 volume in the UEFI/BIOS before installing the OS — skipping the array creation step leaves the drives as JBOD.

What maintenance or replacement will the DL160 Gen9 need later?

The 550 W redundant hot-swap power supplies and the 7.2 K RPM SATA drives are the only field-replaceable mechanical parts; fan modules and DIMMs can also be swapped without tools.

What limit appears first when both Xeon E5-2623 v3 CPUs run at 3 GHz continuously?

The B140i software RAID controller supports only SATA drives at 6 Gbps, so sustained write throughput caps at the SATA link speed before CPU or memory bandwidth becomes a bottleneck.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.