Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver rectangular 3.5 inch internal hard drive with label showing HPE 605474-001 1 TB SAS 7200 RPM

HPE

HPE 605474-001 1 TB SAS 7200 RPM 3.5" internal hard drive

SKU CH-SQMJ-YBR66

A 1 TB internal hard drive with a SAS 6Gb/s interface, 7200 RPM spindle speed and a 3.5" form factor for compatible HP storage arrays

  • InterfaceSAS 6Gb/s
  • Capacity1TB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • Form Factor3.5"
  • 1 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • SAS 6Gb/s interface provides reliable server connectivity
  • 5 inch form factor fits standard drive bays
  • Compatible with HP StoreOnce and P2000 storage systems

1 TB SAS hard drive for HP storage arrays

This 1 TB SAS hard drive operates at 7200 RPM with a 6Gb/s SAS interface in a 3.5" internal form factor. It is designed as an HP Qualified Option for compatible HP storage systems such as the B6200 StoreOnce and P2000 enclosures. The drive uses SLC NAND flash memory for its internal operations. It targets administrators expanding capacity in supported HP arrays.

Sustained workload behaviour

The 7200 RPM spindle speed delivers consistent rotational performance for sequential read and write tasks across the 1 TB capacity. SAS 6Gb/s signalling maintains link stability during extended backup or archive operations. The SLC flash component assists with metadata handling under continuous I/O load. Mechanical latency remains constant because the motor speed does not vary with thermal conditions.

Installation and common issues

The drive fits standard 3.5" drive bays in the listed HP enclosures and connects via dual-port SAS connectors. Hot-plug insertion is supported by the compatible chassis controllers. A frequent issue occurs when the drive is placed in a non-HP backplane that does not negotiate the 6Gb/s link correctly. Firmware mismatch between the drive and the array controller can also prevent the volume from coming online.

Priekšrocības

  • 1 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • SAS 6Gb/s interface provides reliable server connectivity
  • 5 inch form factor fits standard drive bays
  • Compatible with HP StoreOnce and P2000 storage systems

Specifikācijas

BrandHPE
InterfaceSAS 6Gb/s
Capacity1TB
NAND Flash Memory TypeSLC
RPM7200 RPM
Form Factor3.5"

Jautājumi par šo preci

How much heat and noise does the 7200 RPM SAS drive produce when running continuously?

The 3.5" form factor and 7200 RPM spindle speed mean the drive generates typical enterprise-level heat and acoustic output for sustained operation; ensure your enclosure provides adequate airflow for 6Gb/s SAS drives.

What host interface and physical slot are required to install this 605474-001 drive?

You need a system or enclosure with a 6Gb/s SAS backplane or controller and an available 3.5" drive bay that supplies both data and power connections for the SAS interface.

Will this 1 TB SAS drive work in my older HP StorageWorks P2000 G3 MSA array?

Yes, the drive is listed as compatible with the HP StorageWorks P2000 G3 iSCSI MSA Dual Controller LFF Array and other supported HP platforms such as the B6200 StoreOnce and VLS9200 systems.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.