HPE
HPE 875330-B21 3.84 TB SAS 2.5" internal solid state drive
3.84 TB SAS solid-state drive for HPE servers, 2.5" hot-pluggable with 12 Gb/s interface
- NAND Flash Memory TypeSolid State Drive
- Accelerate data-intensive workloads with high random read/write IOPs
- Read-intensive endurance below one drive write per day
- Reduce power consumption while maintaining high performance
- 12Gb/s SAS interface with hot-pluggable 2.5" form factor
- Backed by 3.35 million hours of HPE qualification testing
HPE 875330-B21 3.84 TB SAS SSD
This HPE solid-state drive provides 3.84 TB of storage capacity for server deployments. It uses a 12Gb/s SAS interface in a 2.5-inch internal form factor. The drive is hot-pluggable and designed for read-intensive workloads. It carries part number 875330-B21 and is validated for HPE server compatibility.
Suited for read-heavy server workloads
This drive targets applications needing high random read IOPs performance with endurance below one drive write per day. It reduces power consumption while accelerating data-intensive tasks. Buyers needing higher write endurance for mixed or write-heavy workloads should consider a different drive class. The SAS interface also requires a compatible controller or backplane.
12Gb/s SAS interface determines fit
The drive connects via a 12Gb/s SAS interface, so the host system must support this standard. A 2.5-inch drive bay and hot-plug capability are also required for installation. Compatibility is qualified specifically for HPE server platforms. Verify the controller and backplane match these requirements before purchase.
Priekšrocības
- Accelerate data-intensive workloads with high random read/write IOPs
- Read-intensive endurance below one drive write per day
- Reduce power consumption while maintaining high performance
- 12Gb/s SAS interface with hot-pluggable 2.5" form factor
- Backed by 3.35 million hours of HPE qualification testing
Specifikācijas
| Brand | HPE |
|---|---|
| NAND Flash Memory Type | Solid State Drive |
Jautājumi par šo preci
How do I install the 875330-B21 2.5" SAS drive into an HPE server, and which step is often missed?
Slide the drive into a hot-pluggable 2.5" bay until the carrier clicks, then verify the SAS 12Gb/s link lights show green before putting the server back into production.
What maintenance or replacement should I plan for with this Read Intensive SSD?
The drive is rated for under one full drive write per day; monitor SMART wear indicators and replace the unit once the endurance threshold is reached.
What limit appears first when the 3.84 TB drive runs sustained heavy read workloads?
The 12Gb/s SAS interface bandwidth caps throughput before the NAND reaches its read IOPS ceiling.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
