Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
A 3.5 inch SAS hard drive inside a black hot-swap carrier tray with a green release lever

HPE

HPE MB4000JEFNC 4TB 7200RPM 12Gb/s SAS 3.5" internal hard drive

SKU CH-G7K4-2ZTG2

Stores 4 TB of data on a 3.5-inch SAS drive spinning at 7200 RPM with a 12 Gb/s interface and includes a Smart Carrier caddy

  • 4 TB capacity stores large datasets
  • 7200 RPM spindle speed enables quick data access
  • 12 Gb/s SAS interface delivers high throughput
  • 512e format improves storage efficiency
  • Hot-swap tray allows drive changes without downtime

4 TB Midline SAS Hard Drive

The HPE MB4000JEFNC is a 4 TB internal hard drive that spins at 7200 RPM and connects through a 12 Gb/s SAS interface. It uses a 512e sector format and fits a standard 3.5 inch drive bay. The package includes a Smart Carrier caddy for hot-swap installation in compatible bays.

Suited for capacity-focused SAS arrays

This drive suits administrators who need midline capacity in servers or storage arrays that accept 12 Gb/s SAS hot-swap bays. It is not for systems that lack SAS backplane support or that require enterprise-class endurance ratings. Buyers needing higher rotational speeds or smaller form factors should consider other options.

12 Gb/s SAS interface determines compatibility

The single specification that decides fitment is the 12 Gb/s SAS interface combined with the 3.5 inch hot-swap form factor. Only chassis and controllers built for this interface and carrier style can use the drive. Verify the host system supports 12 Gb/s SAS before purchase.

Priekšrocības

  • 4 TB capacity stores large datasets
  • 7200 RPM spindle speed enables quick data access
  • 12 Gb/s SAS interface delivers high throughput
  • 512e format improves storage efficiency
  • Hot-swap tray allows drive changes without downtime

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How much power does the 7200RPM SAS drive draw when it runs continuously?

The 3.5-inch 7200RPM SAS drive is a Midline model built for sustained operation in server bays; typical idle and active power figures are published in the HPE specification sheet for the MB4000JEFNC.

What controller or backplane must I already have to use the 12Gb/s SAS interface?

You need a SAS host bus adapter, RAID controller or server backplane that supports 12Gb/s SAS signalling and can accommodate a 3.5-inch hot-swap tray.

Will the included SMART CARRIER tray fit the drive bays in my Gen8 or Gen9 ProLiant server?

The supplied SMART CARRIER caddy matches the standard 3.5-inch hot-swap bay used across HPE Gen8 and Gen9 ProLiant models, so the drive slides straight in.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.