Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 2U rack server, eight 2.5 inch drive bays front, two 500W power supplies rear

HPE

HPE ProLiant DL380 Gen9 8SFF 2x Xeon E5-2630 v3 768GB DDR4 rack server

SKU CH-K2G0-Z2SNW

A 2U rack server with two 2.4 GHz Xeon E5-2630 v3 processors and 768 GB DDR4 memory, supporting eight 2.5-inch drive bays and an HPE Smart Array P440 SAS controller

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.4GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size768GB
  • Dual Xeon E5-2630 v3 processors at 2.4GHz handle multi-threaded workloads
  • 768GB DDR4 ECC registered memory supports large datasets and virtualization
  • Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage
  • HPE iLO Advanced remote management provides out-of-band server control
  • Redundant 500W power supplies maintain uptime during power events

Dual Xeon 8SFF Server

The HPE ProLiant DL380 Gen9 is a 2U rack-mount server system built for virtualization, database and compute workloads. It ships with two Intel Xeon E5-2630 v3 processors running at 2.4GHz and 768GB of DDR4 ECC registered memory. The eight-bay 2.5-inch SFF chassis uses an HPE Smart Array P440 SAS controller for internal storage. Remote management is provided by HPE iLO Advanced.

Fits dense memory needs, not storage-heavy builds

This configuration suits buyers who need large memory capacity in a compact rack footprint for virtualization hosts or in-memory applications. The 768GB installed across both CPUs supports high consolidation ratios without additional DIMM purchases. Buyers who want internal drives included should look elsewhere, as no drives are installed and the chassis requires separate drive selection. Workloads demanding GPU acceleration or more than two processor sockets are not supported by this platform.

768GB DDR4 installed capacity

The single specification that decides fit is the 768GB of DDR4 ECC registered memory already populated across the two processors. This amount is fixed in the listed configuration and determines whether the server meets the minimum memory requirement for the target workload before any further expansion up to the 3TB maximum.

Priekšrocības

  • Dual Xeon E5-2630 v3 processors at 2.4GHz handle multi-threaded workloads
  • 768GB DDR4 ECC registered memory supports large datasets and virtualization
  • Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage
  • HPE iLO Advanced remote management provides out-of-band server control
  • Redundant 500W power supplies maintain uptime during power events

Specifikācijas

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.4GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)4,00
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Jautājumi par šo preci

How do I confirm the P440 SAS controller and both Xeon E5-2630 v3 processors are detected after power-on?

Watch the POST screen for the P440 option ROM banner and two CPU lines showing 2.4GHz 8-core each; then open iLO and verify both processors and all 768GB DDR4 appear in the System Health summary.

Which components ship inside the chassis and which must I order separately?

The unit includes two Xeon E5-2630 v3 CPUs, 768GB DDR4 ECC registered memory, P440 PCIe SAS controller, dual 500W Flex Slot power supplies, Intel I350/X540 2×10GbE+2×1GbE card and iLO Advanced; drive bays are empty so 2.5" SATA drives and a rail kit are purchased separately.

Should I choose the 8SFF chassis or a different bay count for my workload?

The 8SFF chassis supports up to eight 2.5" SATA drives behind the P440 controller; select it when you need high spindle density in a 2U rack footprint, otherwise a large-form-factor model would be the alternative.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.