Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular ATX motherboard with silver LGA 2011 socket, black PCIe slots, blue DIMM slots, and grey M.2 slot

HUANANZHI

HUANANZHI X99 AD3 REV3.0 Intel motherboard

SKU CH-MGYC-58XQZ

LGA 2011-3 X99 ATX board with 10-layer PCB, dual 16X PCI-E 3.0 slots and DDR3 support up to 128 GB

  • CPU Socket TypeLGA 2011
  • Supports up to 128GB DDR3 memory for heavy workloads
  • X99 chipset with LGA 2011-3 socket fits compatible CPUs
  • Dual PCI-E 3.0 16X slots enable multi-GPU configurations
  • 10-layer PCB design improves signal integrity
  • Compact 283mm x 215mm form factor requires case clearance check

X99 AD3 REV3.0 LGA 2011-3 board

The HUANANZHI X99 AD3 REV3.0 is an Intel X99 motherboard built on a 10-layer PCB for LGA 2011-3 processors. It accepts DDR3 memory modules and provides two PCI-E 3.0 16X slots plus two smaller PCI-E slots for expansion cards. Gigabit Ethernet is integrated for wired networking.

283 mm by 215 mm non-standard ATX size

This board measures 283 mm by 215 mm, which is smaller than the standard ATX footprint, so builders must verify that their case mounting points and I/O shield align before purchase. It suits users who need a compact X99 platform with multiple graphics slots and DDR3 support. Those who require a standard ATX layout or integrated graphics should consider a different model.

128 GB DDR3 ECC capacity ceiling

The platform supports up to 128 GB of DDR3 ECC memory across its DIMM slots, setting the practical limit for memory-heavy workloads. Populating all slots with compatible DDR3 ECC modules reaches this ceiling. No other memory generation or non-ECC specification is supported by this chipset implementation.

Priekšrocības

  • Supports up to 128GB DDR3 memory for heavy workloads
  • X99 chipset with LGA 2011-3 socket fits compatible CPUs
  • Dual PCI-E 3.0 16X slots enable multi-GPU configurations
  • 10-layer PCB design improves signal integrity
  • Compact 283mm x 215mm form factor requires case clearance check

Specifikācijas

BrandHUANANZHI
SeriesX99 AD3
ModelX99 AD3
CPU Socket TypeLGA 2011

Jautājumi par šo preci

How much DDR3 memory can the X99 AD3 REV3.0 actually address?

The board supports up to 128GB of DDR3 ECC or non-ECC memory across its slots.

What PCIe generation do the x16 slots run at and what bandwidth does that cap?

Both x16 slots operate at PCIe 3.0, limiting each to roughly 16 GB/s theoretical bandwidth.

Will this 283mm by 215mm board fit in a standard ATX case?

The board is wider than standard ATX, so verify your case can accommodate 283mm width before installing.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.