Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Metal PCIe card with removable U.2 NVMe drive tray

ICY DOCK

ICY DOCK ToughArmor MB111VP-B U.2 U.3 NVMe PCIe 4.0 rack server

SKU CH-D511-JGFF6

A removable U.2/U.3 NVMe tray fits a PCIe 4.0 x4/x8/x16 slot, supports hot-plug swaps without powering down, and delivers up to 64Gbps throughput

  • TypeRack
  • Hot-swap U.2/U.3 NVMe drives without powering down the system
  • PCIe 4.0 x4 delivers up to 64Gbps transfer speed
  • Fits PCIe x4, x8 and x16 slots for flexible installation
  • Removable tray rated for 10,000 insertion cycles ensures long-term reliability
  • Rugged metal chassis protects the SSD in demanding environments

U.2/U.3 NVMe adapter for PCIe 4.0 slots

The ICY DOCK ToughArmor MB111VP-B converts a free PCIe expansion slot into a removable 2.5-inch bay for a single U.2 or U.3 NVMe drive up to 9.5mm tall. It targets workstation builders and server administrators who need front-access hot-swap capability without opening the chassis. The card accepts PCIe 4.0 x4, x8 or x16 slots and delivers up to 64Gbps throughput.

Thermals noise and power draw in normal use

The all-metal chassis and open tray design passively dissipate heat from the installed SSD during typical workloads. No onboard fan means zero added acoustic noise, and the adapter draws negligible power beyond the drive itself. Hot-plug support allows drive insertion or removal without powering down the system, backed by an SFF-8639 connector rated for 10,000 cycles.

Sustained load behaviour under continuous operation

Under prolonged heavy I/O the metal body acts as a heatsink, helping maintain consistent SSD performance without thermal throttling. The Eagle-hook lock secures the tray against vibration-induced ejection during extended runs. PCIe 4.0 x4 electrical connectivity sustains the full 64Gbps link width for the duration of the workload.

Priekšrocības

  • Hot-swap U.2/U.3 NVMe drives without powering down the system
  • PCIe 4.0 x4 delivers up to 64Gbps transfer speed
  • Fits PCIe x4, x8 and x16 slots for flexible installation
  • Removable tray rated for 10,000 insertion cycles ensures long-term reliability
  • Rugged metal chassis protects the SSD in demanding environments

Specifikācijas

TypeRack

Jautājumi par šo preci

How do I install the MB111VP-B into a PCIe slot and what step is often missed?

Insert the card into any PCIe x4, x8 or x16 slot, then secure the bracket screw; the step often missed is seating the U.2/U.3 SSD firmly into the SFF-8639 connector on the tray before sliding the tray into the chassis.

What maintenance or replacement will the MB111VP-B need over time?

The SFF-8639 connector is rated for 10,000 insertion and removal cycles; after that the connector may need replacement to maintain reliable hot-plug operation.

What limit appears first when the MB111VP-B runs under sustained load?

The PCIe 4.0 x4 interface caps throughput at 64Gbps, so that bandwidth ceiling is the first limit reached during continuous high-speed transfers.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.