Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black USB-A to SATA adapter cable with LED indicators, 0.5m

iDsonix

iDsonix USB 2.0 to SATA 2.5" Hard Drive Adapter 0.5m

SKU CH-08K9-PHYYQ

Connects a 2.5 inch SATA SSD or hard drive to a USB 2.0 port at up to 480 Mbps with LED status lights and no driver needed

  • StandardsUSB 2.0
  • Transfer Rate400/480Mbps
  • Featureshigh speed transmission Small and portable No driver require
  • Package Contents1 x Type A and USB to SATA Cable w/ case
  • Connect any 2.5" SATA drive via USB 2.0
  • Transfer files at up to 480 Mbps
  • Works with SATA I, II and III drives
  • Red and blue LEDs show power and activity
  • Compact 0.5 m cable, no driver needed

What this adapter does

The iDsonix USB 2.0 to SATA adapter connects a standard 2.5 inch SATA hard drive or solid-state drive to a computer through a USB 2.0 Type-A port. It is intended for users who need quick access to bare drives for file backup or notebook drive upgrades without installing them internally. No driver installation is required on supported operating systems.

Build and daily use

The cable assembly includes a SATA data and power connector for the drive and a USB 2.0 Type-A plug for the host, with a total length of 0.5m. A compact enclosure houses the bridge electronics and features red and blue LED indicators that show power status and data activity respectively. The lightweight design makes it easy to carry in a laptop bag for on-the-go drive access.

Thermals and power

The adapter draws power directly from the host USB 2.0 port, so no external power supply is needed for typical 2.5 inch drives. The bridge controller operates at USB 2.0 speeds with a maximum transfer rate of 480Mbps, generating minimal heat during normal file transfers. No active cooling is present and the unit runs silently in use.

Priekšrocības

  • Connect any 2.5" SATA drive via USB 2.0
  • Transfer files at up to 480 Mbps
  • Works with SATA I, II and III drives
  • Red and blue LEDs show power and activity
  • Compact 0.5 m cable, no driver needed

Specifikācijas

BrandiDsonix
ModelUSB2.0-A-0.5m
StandardsUSB 2.0
Transfer Rate400/480Mbps
Featureshigh speed transmission
Small and portable
No driver required, plug and play
Package Contents1 x Type A and USB to SATA Cable w/ case

Jautājumi par šo preci

What real-world speed does the USB 2.0 interface cap at?

The USB 2.0 link tops out at 480 Mbps, so even a SATA III drive will not exceed that throughput.

What drive size and connector does the adapter fit?

It accepts any standard 2.5 inch SATA hard drive or SSD with the usual 7+15-pin connector.

How do I install it and which step do people miss?

Plug the SATA end into the drive, connect the USB-A plug to the computer, and ensure the drive is fully seated so both red and blue LEDs light up.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.