Intel
Intel 670p SSDPEKNU010TZN1 1TB M.2 2280 NVMe internal SSD
1TB M.2 2280 NVMe drive with up to 3500 MBps read, 2500 MBps write and 370 TBW for desktops and thin clients
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory ComponentsQLC
- InterfacePCI-Express 3.0 x4
- Max Sequential ReadUp to 3500 MBps
- Fast boot and load times with up to 3500 MB/s sequential read
- Smooth large-file writes sustained at up to 2500 MB/s sequential write
- Long service life rated for 370 TB written endurance
- Reliable operation backed by 1.6 million hours MTBF
- Data protected by 256-bit hardware encryption standard
Capacity and use-case
The Intel 670p SSDPEKNU010TZN1 is a 1TB internal solid-state drive built for consumer devices. Its M.2 2280 form factor fits thin clients, desktop PCs and tablets that accept this module size. QLC memory components keep the cost per gigabyte low while still providing 370 TB of rated endurance. The drive draws 80 mW during active operation.
PCIe 3.0 x4 bandwidth ceiling
The drive connects through a PCI-Express 3.0 x4 interface, which caps theoretical throughput below the speeds possible with newer link generations. Sequential reads reach up to 3500 MBps and writes up to 2500 MBps within that limit. Systems limited to PCIe 3.0 will not benefit from faster NVMe controllers. The 256-bit encryption standard operates independently of the link speed.
Endurance rating decides suitability
A terabytes-written figure of 370 TB is the single number that tells you whether this drive matches your workload. Heavy write-intensive tasks such as sustained video capture or database logging can approach that limit faster than typical desktop use. Mean time between failures is rated at 1,600,000 hours and the drive tolerates 1000G of shock.
Priekšrocības
- Fast boot and load times with up to 3500 MB/s sequential read
- Smooth large-file writes sustained at up to 2500 MB/s sequential write
- Long service life rated for 370 TB written endurance
- Reliable operation backed by 1.6 million hours MTBF
- Data protected by 256-bit hardware encryption standard
Specifikācijas
| Brand | Intel |
|---|---|
| Model | 670p |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | QLC |
| Interface | PCI-Express 3.0 x4 |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 2500 MBps |
| Terabytes Written (TBW) | 370 TB |
| MTBF | 1,600,000 hours |
| Power Consumption (Active) | 80 mW |
| Max Shock Resistance | 1000G |
| Sūtījuma svars | 0.07 kg |
| Sūtījuma izmēri | 135 × 102 × 15 mm |
Jautājumi par šo preci
Should I choose the 1TB capacity for my build?
The 1TB model delivers 3500 MBps sequential read and 2500 MBps sequential write with 370 TBW endurance, suitable for desktops, thin clients and tablets.
What does the 3500 MBps read speed mean in daily use?
That peak rate applies to large sequential transfers over the PCIe 3.0 x4 link; random workloads and thermal limits will yield lower sustained throughput.
How does the PCIe 3.0 x4 interface affect performance?
The four-lane Gen 3 connection caps sequential bandwidth near the rated 3500 MBps read and 2500 MBps write, and the drive uses NVMe protocol.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
