Intel 760p Series M.2 2280 128GB PCI-Express 3.0 x4 Internal SSD SSDPEKKW128G8XT
- Internal Solid Stat…
- Consumer
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Intel
1TB M.2 2280 NVMe SSD with PCIe 3.1 x4 interface delivering up to 3230 MBps read and 1625 MBps write speeds
This internal solid-state drive uses the M.2 2280 form factor and a PCIe NVMe 3.1 x4 interface. It is built with Intel 3D2 TLC NAND and targets consumers who need fast storage for desktops or thin laptops. The drive delivers sequential reads up to 3230 MBps and writes up to 1625 MBps. Random performance reaches 340,000 read IOPS and 275,000 write IOPS.
The x4 lane configuration caps theoretical bandwidth near 4 GBps, so sustained speeds top out at the rated 3230 MBps read and 1625 MBps write. Random workloads are bounded by the 340K and 275K IOPS figures. The controller idles at 25 mW and draws 50 mW active, while the operating range spans 0°C to 70°C. Endurance is rated at 576 TBW with a 1.6 million hour MTBF.
This 760p model doubles the PCIe performance of the earlier 600p series and offers twice the capacity at equivalent densities. It cuts power consumption by up to 50 percent compared with that previous generation. The jump is worth it when workloads demand higher sequential throughput, better random IOPS or the 1TB capacity in an M.2 2280 form factor.
| Brand | Intel |
|---|---|
| Series | 760p Series |
| Model | SSDPEKKW010T8X1 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D2 TLC |
| Interface | PCIe NVMe 3.1 x4 |
| Max Sequential Read | Up to 3230 MBps |
| Max Sequential Write | Up to 1625 MBps |
| 4KB Random Read | Up to 340,000 IOPS |
| 4KB Random Write | Up to 275,000 IOPS |
| MTBF | 1,600,000 hours |
| Features | Endurance Rating (Lifetime Writes): 576 TBW |
| Power Consumption (Idle) | 25 mW |
| Power Consumption (Active) | 50 mW |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000G |
| Max Vibration Resistance | Operating: 2.17 GRMS (5-700 Hz) Non-operating: 3.13 GRMS (5-800 Hz) |
| Height | 2.38mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | < 10.00g |
| Sūtījuma svars | 0.08 kg |
| Sūtījuma izmēri | 130 × 97 × 23 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The 1TB model gives 576 TBW endurance and up to 3230 MBps sequential read, while smaller capacities may have lower endurance and write speeds.
It is the peak throughput for large, contiguous files; real-world speeds depend on your motherboard's PCIe 3.1 x4 lane allocation and thermal headroom.
The x4 lane limit tops theoretical bandwidth near 32 Gbps, so the drive's 3230 MBps read and 1625 MBps write sit at that ceiling.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?