Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

KEHIPI

KEHIPI LN05101 120° CS Lens 3.2mm for Raspberry Pi HQ Camera

SKU CH-B55G-K32F1

Ultra-wide 120° CS-mount lens with 3.2mm focal length and manual focus for Raspberry Pi HQ Camera

  • 120° horizontal field of view on IMX477 sensor
  • 2 mm focal length with manual focus ring
  • F/2.0 aperture for brighter low-light images
  • CS-mount fits Raspberry Pi HQ Camera directly
  • Compact 28 × 30 mm design weighs 54 g

Ultra-wide CS lens for Pi HQ Camera

The KEHIPI LN05101 is a 3.2 mm focal-length CS-mount lens built for the Raspberry Pi High Quality Camera. It gives makers and developers a 120 degree horizontal field of view on the IMX477 sensor, far wider than the 65 degree view of a typical 6 mm lens. The 1/1.7 inch optical format and F/2.0 fixed iris are matched to the 12 MP module for even illumination across the frame.

Drop-in fit for existing HQ Camera builds

The lens threads directly onto the camera’s CS mount without adapters or spacer rings. Its 28 by 30 mm barrel and 54 g mass add minimal bulk, leaving enclosure clearance and cable routing unchanged. Manual focus lets you set the working distance once at install time, so the module stays locked in position for headless or remote deployments.

120 degree coverage with known limits

On the HQ Camera the lens captures a full 120 degree horizontal span with no vignetting or dark corners. The fixed F/2.0 aperture and 3.2 mm focal length set a constant depth-of-field profile that suits wide-area monitoring, robotics vision and immersive streaming. Builders who need telephoto reach, variable aperture or a narrower field for distant detail will need a different optic.

Priekšrocības

  • 120° horizontal field of view on IMX477 sensor
  • 2 mm focal length with manual focus ring
  • F/2.0 aperture for brighter low-light images
  • CS-mount fits Raspberry Pi HQ Camera directly
  • Compact 28 × 30 mm design weighs 54 g

Specifikācijas

BrandArducam
ModelLN05101
Part NumberLN05101

Jautājumi par šo preci

Does the 120 degree horizontal field of view on the IMX477 sensor cause vignetting at the corners?

The lens is tested on the 12MP Raspberry Pi HQ Camera with no lens shading or dark corners, delivering decent image quality across the full 120 degree horizontal field of view.

How much heat does the lens generate during continuous all-day operation?

The passive glass lens produces no measurable heat during extended use; thermal load comes from the camera board and processor, not from the optic itself.

Which camera board must I already own for this CS-mount lens to function?

You need a Raspberry Pi High Quality Camera with an IMX477 sensor and CS-mount interface; the lens threads directly onto that module.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.