Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
KHACHIMO 650W ATX power supply unit, metal housing, cooling fan, cable bundle

KHACHIMO

KHACHIMO DPS-725AB A 482513-003 508548-001 650W Z600 power supply

SKU CH-BH9Q-H4CQ5

650W ATX power supply tested working for Z600 workstations

  • TypeATX
  • 650 W output supports demanding workstation builds
  • Tested working so it powers on reliably
  • ATX form factor fits standard chassis
  • Replaces HP Z600 part numbers 482513-003 and 508548-001

650W ATX power supply for HP Z600 workstations

This unit is a KHACHIMO DPS-725AB rated at 650 watts and built to the ATX form factor. It carries part numbers 482513-003 and 508548-001 for direct replacement in HP Z600 systems. The supply is new and has been tested working by the supplier. It suits technicians or owners restoring or maintaining those workstations.

Thermals noise and power draw in normal use

The 650W rating defines the maximum continuous output available to the system components. Under typical loads the unit delivers stable power within its specified limits. Acoustic output and temperature rise will vary with case airflow and the actual power drawn by the installed hardware. Buyers needing higher wattage or a different form factor should select another model.

Priekšrocības

  • 650 W output supports demanding workstation builds
  • Tested working so it powers on reliably
  • ATX form factor fits standard chassis
  • Replaces HP Z600 part numbers 482513-003 and 508548-001

Specifikācijas

TypeATX

Jautājumi par šo preci

How do I install the DPS-725AB 650W ATX power supply in a Z600 workstation, and what alignment step is often missed?

Slide the unit into the chassis until the 482513-003 labelled connector seats firmly, then tighten the four rear screws; the step often missed is fully engaging the main power plug before securing the screws.

What maintenance will the DPS-725AB 650W ATX power supply need over time?

Periodically blow dust from the intake grill with compressed air; if the fan develops bearing noise or airflow drops, replace the fan assembly using the 508548-001 service reference.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.