Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular metal power supply unit with ventilation slots and terminal connectors

KHACHIMO

KHACHIMO HWS600 24V 600W power supply

SKU CH-GR0N-VX2CJ

Delivers 24 V at 600 W in an ATX switching power supply for reliable PC operation

  • TypeATX
  • 24 V output matches industrial equipment requirements
  • 600 W capacity powers multiple high-load modules
  • ATX form factor fits standard chassis layouts
  • Tested and verified for reliable operation

Industrial 24V 600W unit

This switching power supply delivers a single 24 volt output rated at 600 watts. It is built for industrial equipment, test benches and automation cabinets that require a stable DC rail. The ATX form factor allows mounting in standard enclosures.

Capacity and headroom

The 600 watt rating supports continuous loads such as motor drives, LED arrays or PLC systems running near full power. Headroom shrinks when ambient temperatures rise or when cables add voltage drop, so sustained peaks above the rated current are not supported. Builders needing multiple output voltages or redundant modules should look elsewhere.

Priekšrocības

  • 24 V output matches industrial equipment requirements
  • 600 W capacity powers multiple high-load modules
  • ATX form factor fits standard chassis layouts
  • Tested and verified for reliable operation

Specifikācijas

TypeATX

Jautājumi par šo preci

Will the 600W output run reliably with an older ATX motherboard that still uses a 20-pin main connector?

The unit follows the ATX form factor and provides 600W at 24V, so it will power a 20-pin board when used with a standard 24-to-20 pin adapter.

How can I confirm the 24V rail is delivering stable power after installation?

Measure the output with a multimeter under load; a steady reading at 24V shows the supply is operating as specified.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.