Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two black DDR4 UDIMM modules with matte heatsinks, 288-pin edges, sold as a 32GB kit

KingSpec

KingSpec KS3200D4M13516Gx2-Black 32GB (2×16GB) DDR4 3200 CL18 Heatsink desktop RAM

SKU CH-2EQX-NEZ2H

A 32 GB dual-channel DDR4 3200 kit with CL18 latency, XMP 2.0 support and a black heatsink for AMD and Intel desktops

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL18
  • ECCNo
  • Multi-channel KitDual Channel Kit

Capacity 32GB (2 x 16GB)

Other DDR4 3200 (PC4 25600) · CL18 · Black

  • 32 GB capacity across two 16 GB modules
  • 3200 MHz DDR4 speed rated at PC4 25600
  • CL18 latency for responsive performance
  • XMP 2.0 profile enables easy overclocking
  • Black heatsink dissipates heat for stable operation

Capacity and audience

This 32 GB dual-channel kit uses two 16 GB DDR4 modules rated at 3200 MHz with CL18 timing. It targets gamers and business users who want responsive performance for gaming, rendering or heavy multitasking on mainstream Intel and AMD platforms.

Thermals noise and power

A black aluminium heatsink covers each module to move heat away from the memory chips during sustained loads. DDR4 architecture reduces voltage compared with DDR3, lowering overall power draw while the spreader keeps clocks stable without adding fan noise.

XMP profile and compatibility

An XMP 2.0 profile stores the 3200 MHz speed and CL18 latency so the kit can configure itself with a single BIOS toggle. The 288-pin UDIMM form factor fits standard desktop slots and the kit is validated for both AMD and Intel motherboards.

Priekšrocības

  • 32 GB capacity across two 16 GB modules
  • 3200 MHz DDR4 speed rated at PC4 25600
  • CL18 latency for responsive performance
  • XMP 2.0 profile enables easy overclocking
  • Black heatsink dissipates heat for stable operation

Specifikācijas

BrandKingSpec
SeriesDDR4 Heatsink
ModelKS3200D4M13516Gx2-Black
Part NumberKS3200D4M13516Gx2-Black
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL18
ECCNo
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileXMP 2.0
ColorBlack
Heat SpreaderYes
Recommend UseAMD & Intel Compatible
LED ColorNone

Citas šī modeļa versijas

Vēl 3 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the 288-Pin DDR4 modules and enable the XMP 2.0 profile?

Align the notch on each 288-Pin module with the motherboard slot key, press down firmly until the retention clips click, then enter the BIOS and enable the XMP 2.0 profile to run at the rated 3200 speed.

What maintenance or replacement will the dual-channel 32GB kit need over time?

The aluminium heatsinks are passive and require no service; if a module fails, replace the full 2×16GB kit to keep dual-channel performance matched.

What limit appears first when the CL18 memory runs sustained workloads?

The CAS latency of CL18 at 3200 MT/s sets the response-time floor; thermal throttling is unlikely because the heatsinks dissipate heat continuously.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.