Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular circuit board with gold edge connector and black memory chips

Kingston Technology Corp.

Kingston Technology Corp. KTT667D2/1G 1GB DDR2-667 CL5 200-pin SODIMM 1.8V

SKU CH-M3V8-KRSA0

1GB DDR2 laptop module running at 667 MHz with CL5 latency and 1.8V operation

  • Capacity1GB
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCNo
  • 1GB capacity for DDR2 laptop upgrades
  • 667 MHz DDR2 speed rated PC2-5300
  • CL5 CAS latency for responsive timing
  • 8 V operation matches DDR2 standard
  • 200-pin SODIMM fits compatible notebook slots

Kingston 1 GB DDR2-667 SODIMM

This Kingston KTT667D2/1G module provides 1 GB of DDR2 laptop memory in a 200-pin SO-DIMM form factor. It operates at 667 MHz with a PC2-5300 speed rating and CL5 latency. The stick runs at 1.8 V and uses an unbuffered, non-ECC design with 2Rx8 chip organisation.

Suits older DDR2 notebooks

This module fits laptops that accept 200-pin DDR2 SO-DIMMs running at 1.8 V with CL5 timing. It is not for systems that require ECC or registered memory, nor for machines limited to lower-density 1Rx8 modules. Buyers needing more than 1 GB per slot should look at higher-capacity DDR2 options.

200-pin DDR2 interface decides fit

The 200-pin DDR2 SO-DIMM interface is the single specification that determines whether this module will install and function. Verify that the target notebook specifies 200-pin DDR2-667 (PC2-5300) unbuffered non-ECC memory at 1.8 V before purchasing.

Priekšrocības

  • 1GB capacity for DDR2 laptop upgrades
  • 667 MHz DDR2 speed rated PC2-5300
  • CL5 CAS latency for responsive timing
  • 8 V operation matches DDR2 standard
  • 200-pin SODIMM fits compatible notebook slots

Specifikācijas

BrandKingston
ModelKTT667D2/1G
Capacity1GB
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered

Jautājumi par šo preci

How does the CL5 latency at DDR2-667 affect responsiveness under sustained workloads?

The CL5 timing at 667 MHz sets the minimum cycle delay for each memory request, so sustained workloads see consistent access latency without tighter timing headroom.

What thermal or power behaviour should I expect when this 1.8 V module runs continuously in a laptop?

Operating at 1.80 V, the unbuffered DDR2 SODIMM draws modest power and produces low heat, allowing passive cooling in typical laptop chassis during all-day use.

Which laptop slot and chipset combination is required for this 200-pin DDR2 SODIMM to function?

A 200-pin DDR2 SO-DIMM socket with PC2-5300 support is needed; the module is non-ECC and unbuffered, so the platform must accept standard consumer DDR2 memory.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.