Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green 184-pin DDR desktop memory module, no heat spreader

Kingston Technology Corp.

Kingston Technology Corp. KVR266X64C25/128 128MB DDR 266 desktop RAM

SKU CH-M7N6-X8250 MPN KVR266X64C25/128

128 MB desktop DDR 266 (PC 2100) module with CL2.5 timing and 2.50 V operation

  • Capacity128MB
  • SpeedDDR 266 (PC 2100)
  • CAS LatencyCL2.5
  • Voltage2.50V
  • Heat SpreaderNo
  • 128 MB capacity adds usable memory for legacy DDR systems
  • DDR 266 (PC 2100) speed matches older motherboard requirements
  • CAS latency 2.5 supports responsive timing at rated frequency
  • 50 V operation aligns with standard DDR voltage specification
  • 184-pin DIMM form factor fits compatible desktop memory slots

128MB DDR 266 ValueRAM module

This Kingston ValueRAM stick delivers 128MB of DDR SDRAM at 266MHz (PC 2100) with CL2.5 latency. It operates at the standard 2.50V and uses the 184-pin DIMM form factor. The module is built to JEDEC specifications for broad desktop compatibility.

No heat spreader and JEDEC standard build

The bare green PCB fits tight spaces without clearance issues and the gold contacts seat firmly in any 184-pin DDR slot. JEDEC compliance means the module negotiates correct timings automatically, so installation is a simple press-in action with no BIOS tuning required.

Replaces slower or failed PC 2100 sticks

Use this module to restore a legacy DDR system to its original specification or to add a single 128MB bank where the board manual allows it. The jump is worth it only when the motherboard explicitly supports PC 2100 at CL2.5 and has a free 184-pin slot.

Priekšrocības

  • 128 MB capacity adds usable memory for legacy DDR systems
  • DDR 266 (PC 2100) speed matches older motherboard requirements
  • CAS latency 2.5 supports responsive timing at rated frequency
  • 50 V operation aligns with standard DDR voltage specification
  • 184-pin DIMM form factor fits compatible desktop memory slots

Specifikācijas

BrandKingston
SeriesValueRAM
ModelKVR266X64C25/128
Capacity128MB
SpeedDDR 266 (PC 2100)
CAS LatencyCL2.5
Voltage2.50V
Heat SpreaderNo
Sūtījuma svars0.23 kg
Sūtījuma izmēri171 × 57 × 13 mm

Jautājumi par šo preci

What peak bandwidth does the PC2100 DDR 266 interface deliver?

The module runs at 266MHz with CL2.5 timing at 2.5V, matching the JEDEC PC2100 specification for DDR 266 desktop memory.

Will this 184-pin DIMM fit my desktop motherboard?

It requires a standard 184-pin DDR SDRAM slot; the notch position follows the JEDEC DDR layout so it only fits DDR-compatible desktop boards.

How do I install the stick and what step is often missed?

Power off, open the case, align the notch with the slot key, press firmly until both retention clips click, then verify 128MB appears in BIOS.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.