Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular silver server PSU, 165 by 82 by 40 mm, 12+4 pin connector

Lemincrash

Lemincrash FSP220-30FABA 220W server power supply 12+4pin

SKU CH-7CK8-8FEWK MPN FSP220-30FABA

220 W server power supply with a 12+4 pin connector for compatible FSP systems

  • TypeFSP
  • Maximum Power220W
  • Main Connector12+4pin
  • Input Frequency Range50/60 Hz
  • FeaturesNew
  • Weight1000g
  • 220W output powers compatible FSP servers
  • 12+4pin main connector fits B630 X4630G X6630G
  • 80 Plus series rating reduces energy waste
  • Compact 165×82×40mm size eases chassis fit
  • 1000g weight simplifies handling and installation

Server replacement PSU

This Lemincrash FSP220-30FABA is a 220W server power supply built for systems that require a 12+4pin main connector. It matches part numbers PS-3221-9AE, PS-3221-9AB, PE-3221-2 and D15-220N1A and is listed for B630, X4630G and X6630G platforms. The unit ships new and weighs 1000g. It is not for builders who need a different pin layout or a higher maximum power rating.

Direct swap install

The power supply measures 165 by 82 by 40 millimetres and uses the standard 12+4pin connector, so it fits the same mounting points as the original FSP units. Installation is a straight replacement with no adapter cables required. The package contains only the PSU itself. Verifying the part number against the confirmation picture before fitting avoids the most common mismatch.

Steady 12 volt output

The supply delivers its 220W maximum power on a 12V rail and accepts 50 or 60 Hz input across the 20 to 90 percent humidity range. It carries the 80 Plus series designation for efficient conversion during continuous server loads. Sustained operation stays within spec without the voltage droop seen in short-burst tests. It is not suited for systems that draw more than 220W or that require multiple independent rails.

Priekšrocības

  • 220W output powers compatible FSP servers
  • 12+4pin main connector fits B630 X4630G X6630G
  • 80 Plus series rating reduces energy waste
  • Compact 165×82×40mm size eases chassis fit
  • 1000g weight simplifies handling and installation

Specifikācijas

BrandLemincrash
Series80 Plus
ModelFSP220-30FABA
TypeFSP
Maximum Power220W
Main Connector12+4pin
Input Frequency Range50/60 Hz
FeaturesNew
Weight1000g
Humidity20%-90%
Package ContentsPSU*1

Jautājumi par šo preci

How can I confirm the 220W server PSU is operating correctly once installed?

After fitting the unit, verify the server powers on and remains stable under load; the 12V output should be present on the 12+4pin connector.

What comes in the box and what must I source separately?

The package contains one PSU only; mounting screws, power cables and any server-specific brackets are not included.

Which part-number variant matches my B630 or X4630G server?

Match the exact model FSP220-30FABA or the listed alternates PS-3221-9AE, PS-3221-9AB, PE-3221-2, D15-220N1A to your server’s service tag.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.