Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with two M.2 slots and a 16-pin ribbon cable

LORDWORLD

LORDWORLD 2-Ch M.2 NVMe Adapter for Raspberry Pi 5 2280/2260/2242/2230

SKU CH-XVE1-ANKPT

Adds dual M.2 NVMe slots to Raspberry Pi 5 via 16-pin PCIe Gen2 link, supporting 2230 to 2280 drives with boot capability and onboard power monitoring

  • High-speed NVMe storage for Raspberry Pi 5 via 16-pin PCIe link
  • Dual M.2 slots accept 2230, 2242, 2260 and 2280 NVMe drives
  • Boot Raspberry Pi 5 directly from NVMe SSD for faster start-up
  • Onboard dual LED indicators show real-time drive activity
  • Power monitoring chip and EEPROM track SSD power status for stable operation

Dual NVMe Adapter for Raspberry Pi 5

This adapter adds two M.2 NVMe slots to a Raspberry Pi 5 through its 16-pin PCIe interface. It accepts 2230, 2242, 2260 and 2280 form factors and runs at PCIe x1 Gen 2 speeds. The board includes dual LED indicators, a power monitoring chip and an EEPROM for stable drive operation and easy status checks.

Makers needing fast local storage on Pi 5

The module suits developers who want to boot the Pi 5 from an NVMe drive or add high-speed storage for edge computing projects. It is not for users who need more than two NVMe drives, require PCIe Gen 3 or Gen 4 speeds, or want to connect drives using protocols other than NVMe.

PCIe x1 Gen 2 interface limit

The single lane Gen 2 link caps maximum throughput, so sequential read and write performance will be lower than on desktop platforms. This specification determines whether the adapter meets the bandwidth needs of a given Raspberry Pi 5 project.

Priekšrocības

  • High-speed NVMe storage for Raspberry Pi 5 via 16-pin PCIe link
  • Dual M.2 slots accept 2230, 2242, 2260 and 2280 NVMe drives
  • Boot Raspberry Pi 5 directly from NVMe SSD for faster start-up
  • Onboard dual LED indicators show real-time drive activity
  • Power monitoring chip and EEPROM track SSD power status for stable operation

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

Will the 16-pin PCIe cable connect to my Raspberry Pi 5 if I also use a HAT that covers the GPIO header?

The adapter connects through the dedicated 16-pin PCIe port on the Raspberry Pi 5, leaving the 40-pin GPIO header free for other HATs or accessories.

How do I confirm both NVMe drives are active after installing them on the 2280 and 2230 slots?

Dual onboard LED indicators show the working status of each drive slot, letting you verify activity at a glance.

Does the package include the 16-pin cable and mounting hardware, or do I need to buy them separately?

The adapter board is supplied; the 16-pin PCIe cable and any mounting screws or standoffs are not included and must be purchased separately.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.